Manual

MK-101 TRACKER Revision 06/05, Effective Date June 07, 2005 Page 26
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE:
1. New Maintenance:
Perform the following after initial purchase and operation of the MK-101 TRACKER.
2. Maintenance Following Use:
To extend the life of the MK-101 TRACKER, the following procedure should be performed after each use.
Lubricate all points listed below with light oils such as, 3 in 1, WD-40, etc.
* A GFCI wall socket is the preferred protective device.
Off
Position
ON/OFF
Switch
(A)
Check and adjust V-belt
tension Following 1
st
48 hours of
operation (See V-belt Inspection)
(A)
Ensure the ON/OFF Switch
is in the OFF position
(B)
Unplug MK-101 TRACKER*
(C)
Lubricate the Guide Wheels
(A)
Lubricate the Roller
Wheel Assembly
Inspect
V-belt
GFCI
Roller Wheel
Assembly
Guide Wheels