Owner's manual

Smoothing of the surface during the use of the coarse polishing discs will deter-

mine the quality of the nish that is achieved.

Once all of the large scratches and marks have been removed, use the ner grit

polishing discs (400, 800, 1800 and 3500) for a quality nish. For a higher luster/

color, nished surface, use the extremely ne 8500 grit polishing disc.

NOTE:

(A)

Place the ON/OFF Switch

in the ON position.

(D)

After working the area, shut

the water supply off.

(G)

Repeat Steps A through F

until all large scratches have

been removed.

(E)

Place the ON/OFF Switch

in the OFF position.

(H)

Change to ne grit discs for

a quality nish.

(F)

Dry surface then rub the surface

with a lumber crayon to deter-

mine the depth of the remaining

scratches.

(I)

Repeat Steps A through F using

ne grit discs to complete polish-

ing of the surface.

(B)

Adjust water ow

(excessive water ow can result

in internal electrical problems).

(C)

Using the coarse grit disc, re-

move all rough scratches

and cut marks.

Polishing Operation

MK-1503SS OPERATION