Owner's manual

(J)

Install the Blade Shaft Cover.

• Always turn the master engine switch to the off position.

• NEVER lubricate components or attempt service on a running machine.

• Keep the machinery in proper running condition.

• Fix damage to the machine immediately and always replace broken parts, or missing decals.

MK-1600 MAINTENANCE

New Maintenance

Perform the following after initial purchase and operation of the saw.

(A)

Change engine oil after

rst month or rst 20 operating

hours (See Engine Manual).

(B)

Check and adjust tension on

all belts following rst

48 hours of operation

(See Belt section).

MAINTENANCE SAFETY

(K)

Remove the Pointer.

(L)

Install the Pointer on the oppo-

site side, next to Blade Guard.

(M)

Verify the stop Clip is installed as

shown.