User Manual

ManualsBrandsMK Diamond ManualsPower sawsMK-APC-W

10.2010

MK-APC/W

OWNERS MANUAL &

OPERATING INSTRUCTIONS

www.mkdiamond.com

MK Diamond Products, Inc.

Caution: Read all safety and operating instructions before

using this equipment. This owners manual MUST

accompany the equipment at all times.

Revision 200

Manual Part No. 168758

Summary of content (4 pages)

PAGE 1
www.mkdiamond.com Revision 200 MK-APC/W OWNERS MANUAL & OPERATING INSTRUCTIONS 10.2010 Manual Part No. 168758 Caution: Read all safety and operating instructions before using this equipment. This owners manual MUST accompany the equipment at all times. MK Diamond Products, Inc.
PAGE 2
INSTRUCTION INTRODUCTION The MK-APC/W walk-behind air saw is designed for simple operation and has been proven to be extremely useful and versatile. A 12" to 20" diameter diamond blade may be mounted on the saw if it is rated and approved for operation at 3,300 RPM. READ, AND CAREFULLY FOLLOW, THE OPERATING AND SAFETY INSTRUCTIONS OF THIS OPERATING AND SAFETY INSTRUCTION MANUAL BEFORE USING THIS PRODUCT.
PAGE 3
INSTRUCTION E. ASSEMBLY INSTRUCTIONS: For shipping convenience, your saw (MK-APC/W) may have been shipped without attaching of handle assembly, jack assembly and pointer. 1. INSTALL THE JACK ASSEMBLY: Release the 2 3/4" bolt on the jack bracket from the saw chassis and the center bolt on the handle quadrant. Rotate the crank on the jack assembly counterclockwise so that the two pivot tubes line up with the nut on the jack bracket and the holes of the center bolt.
PAGE 4
MK-APC/W Heavy duty walk-behind air powered saw with gear box, 20" blade capacity, oiler, whip hose, water feed kit, wrenches, and one quart of ice free air oil. 3,300 RPM saw cuts to 8" depth. 05-78020 AIR OIL Quart of petroleum based ice free oil. 02-17059 OILER #5-PF, 1/2" NPT 02-75504 WATER TANK KIT 8 gallon tank attaches to MK-APC/W for dust suppression. Includes mounting frame and brackets.