Owner's manual

BLADE USAGE

1. Start with a narrow blade, then increase blade size to optimize cutting pass. Narrower blades

work easier than wider blades and usually clean the oor better. Wider is not always better or

faster.

2. Proper blade size and placement, depending on material and sub-oor type, greatly affects

performance.

3. Keep in mind, narrow width blades will make a cleaner oor surface.

4. For wood or wood like oors, pound down or remove any nails or metal obstruction to avoid

blade damage.

5. When working over plywood sub-oor, try to work in the direction of the wood grain.

6. A new sharp blade being used on wood or alike sub oors may work better when slightly

dulled to avoid digging or gouging.

7. When working over concrete, beware of expansion joints and sub-oor mounted receptacles.

8. Keep your work area clean and clear of debris.

9. After you have removed a portion of material, remove it out of the way. This will give the

machine maximum performance and help to keep the work area safe.

10. Dull blades greatly reduce cutting ability. Re-sharpen or replace as needed.

11. Use Sawtec

replacement blades.

MK-VTS/50 FLOOR SCRAPER BLADES

(A)

Blades can be offset in cutting

head for easier access to toe

kicks or removal along the wall