Instruction Manual

MK-SCARIFIER SETUP

The Scarier is capable of performing several different operations simply by changing drum congura-

tion. The following steps describe how it is operated in any conguration.

(A)

Start the Scarier in accor-

dance with Engine Start, Step

1 of the STARTUP section,

page 24.

(B)

Raise the Cutting Drum to the

highest position.

(C)

Place the Engage/Disengage

Lever in the “Lower” position.

(D)

Adjust the height of the Cut-

ting Drum for the Job being

performed (See Basic Grind-

ing Techniques).

(E)

Locate the Vibration Lock.

(F)

Lock the height of the drum

using the Vibration Lock.

(G)

Adjust the speed

by using the Throttle,

as desired.

(H)

Push the Scarier at a

smooth, even pace to per-

form the cut.

(I)

Place the Engage/Disengage

Lever in the “Lift” when the

cut is complete.

When turning the Scarier, lift the Rear Wheels off the ground, and pivot the it on the Front Wheels.

STARTUP

NOTE: