Instruction Manual

53
ITEM DESCRIPTION PART# QTY.
F ASSEMBLY, CONSOLE n/a -
F1
FA1
WELDMENT, CONSOLE (MK RED)
WELDMENT, CONSOLE (ORANGE)
158100
158100-OR
1
1
F2 LABEL, CONTROL 158287 1
F3 LABEL, DEPTH LOCK 155577 1
G ASSEMBLY, STANDARD WIRE HARNESS N/A 1
G WIRE HARNESS, STANDARD, HONDA 158232 1
G SWITCH, ENGINE ON/OFF 157851 1
H ASSEMBLY, THROTTLE HONDA - -
H1 SCREW, 10-24 X 1/2 PAN HEAD PHILLIPS CAP 151744 2
H2 NUT, 10-24 CLIP 155407 2
H3 ASSEMBLY, THROTTLE HEAD 155406 1
H4 CABLE, THROTTLE, HONDA 154158 1
J ASSEMBLY, DEPTH CONTROL - -
- SUBASSEMBLY, DEPTH CONTROL WHEEL 155457 1
J1 WHEEL, DEPTH CONTROL 158574 1
J2 SCREW, 3/8-16 X 1/2 SOCKET HEAD SET 153710 1
J3 KNOB, 1” BALL 158519 1
J4 SCREW, 1/2 X 3/4 SOCKET HEAD SHOULDER, W/ 3/8-16 X 5/8 THREAD 156177 1
- SUBASSEMBLY, DEPTH CONTROL TUBE 155460 1
J5 TUBE, DEPTH CONTROL 155049 1
J6 NUT, 3/8-16 NYLOCK HEX 152505 1
J7 SCREW, 3/8-16 X 2 HEX HEAD CAP 153485 1
J8 BEARING, FLANGE, W/ ZERK FITTING 155151 1
J9 SCREW, 3/8-16 X 1 1/4 HEX HEAD CAP 150774 2
J10 WASHER, 3/8 SAE FLAT 150923 1
J11 NUT, 3/8-16 NYLOCK HEX 152505 2
J12 SPACER, 1.5” DEPTH CONTROL 155161 1
J13 SCREW, 15” DEPTH CONTROL 158521 1
K ASSEMBLY, DEPTH LOCK N/A -
K1 LOCK, 8-7/8 DEPTH CONTROL 157846 1
K2 KNOB, DEPTH LOCK 155845 1
K3 THRUST WASHER 155238 1
K4 NUT, 3/8-16 NYLOCK HEX 152505 1
L ASSEMBLY, QUICK LIFT AND LOWERING LEVER N/A -
L1 LEVER 158102 1
L2 KNOB, 2” BALL 158519 1
L3 SCREW, 3/8-24 X 1 HEX HEAD CAP 157803 1
L4 WASHER, 3/8 SAE FLAT 150923 1
L5 WASHER, 3/8 SPLIT LOCK 150925 1
L6 PIVOT, SHAFT 158288 1
MK-SCARIFIER PARTS LIST