Setup guide
Avoid turning your speakers on their sides (gure 2 below) as this will narrow
the high frequency dispersion.
The performance of your speakers is dependent on their orientation. By controlling the vertical
dispersion, we limit the amount of sound that would otherwise be reected with a time delay from
the oor and ceiling. This means the speakers should always be vertically oriented. The MP-150 is
vertically oriented when its tweeters are vertically stacked (not next to each other). When vertical,
the controlled dispersion is in the correct plane. If they are oriented horizontally (on their
sides), listeners right or left of a direct line from the center of the speaker will hear a compromised
sound quality, an irregular frequency response, as well as some other problems.
Figure 3 optional front speaker placement around a at panel
TV
listeners’