Instruction manual

PRODUCT DESCRIPTION
12 Z216MK_V4.14 © Hermle Labortechnik GmbH
1.8.3 Temperature indication
Proceed as described under point 1.8.2 to enter this program mode and then press the key
„accel/decel“ (5). In the display „accel/decel“ (A-2) appears the word „service“. Now select the letter
„C“ with the adjusting knob (1). As a result in the display „rpm/rcf“ (A-1) appear the words
„CELSI/temp“. If you press the key „rpm/rcf“ (4) now, the word „CELSI“ flashes and you can change
the display into Fahrenheit „FAREN“ with the adjusting knob (1) (see figure 5).
After you have stored the settings (see 1.8.2) you change to the normal program mode again by
switch off the centrifuge for a short while.
Figure 5
2
3
2
3