Instruction manual

OPERATION
22 Z216MK_V4.14 © Hermle Labortechnik GmbH
2.3.3 Preselection of brake intensity and acceleration
Through the key „accel/decel“ (5) this function is activated.
By pressing the key once the word „accel“ (M7) flashes in the display „accel/decel“ (A-2). The
desired acceleration can be pre-selected by the adjusting knob (1). The value 0 is equivalent to the
lowest and the value 9 to the highest acceleration.
By pressing the key „accel/decel“ (5) twice, in the display „accel/decel“ (A-2) indicates the word
„decel“ (M8). Now the desired brake intensity can be pre-selected by the adjusting knob (1). The
value 9 is equivalent to the shortest and the value 0 to longest possible brake time.
All with number marked passages refer to figure 21
See „table 5: acceleration and deceleration times“ (APPENDIX P. V). There are shown the
acceleration and deceleration times for the acceleration and deceleration stages 0 to 9 for
permissible rotors.
Figure 21