Instructions / Assembly

ManualsBrandsMLiAN ManualsCeiling Fans52 in. 3-ABS Blades Black Indoor Ceiling Fan with LED light belt and Remote

CEILING FAN INSTRUCTION MANUAL

Safety Instructions

1. In order to reduce the occurrence of electric shock, the supply line is

connected between the fan and must be installed an all-pole Disconnect

switch, (switch contacts opening distance requirements played a 3mm). If

you lack of electrical knowledge, bo sure Please hold" electrician card"

professional install it for you.

2. To avold electrical shock hazard, ceiling fan installation,removal before

you tun off the power first, will be installed Shall be ground, FireWire, zero

line order of installation, disassembly must be disassembled to the zero line,

the line of fire, earth in the order.

3. In order to reduce electric shock or from accidents. do not use non-local

governor or switch product requirements.

4. When a ceiling fan installation, you must determine the verious parts of

screws securely latched.

5. Rotating celling fan, the blades should not touch any object to avold

danger.

6. Select the appropriate location to install a ceiling fan, ceiling fan blade

away from the ground should Above 2 meters or more Prevent accidental

blade collision accident.

7. To change the fan rotation direction.please turm off and wait for the

blades stop turning after adjustment reversing switch.

8. The power of this machine is 120V/60Hz,maximum motor power of 60W

(specifications of different models of ceiling fans, which Motor power will be

different), each light source lamps maximum 40w.

9. About how to install a ceiling fan and connect the power, please read the

fan assembly procedures carefully.

10. Do not clean the ceiling fan blades with water or detergent directly, use a

dry cloth or slightly dampcloth to wipe In addition to dust. Before cleaning

the ceiling fans, ceiling fan must be disconnected from the power switch.

*Phillips Screwdriver

*Blade Screwdriver

*Adjustable Pliers or

Wrench

*Step Ladder

*Wire Cutter

*Electrical Tape

Tools Needed

WBCF-JT06~JT09

Summary of content (6 pages)

PAGE 1
Safety Instructions CEILING FAN INSTRUCTION MANUAL WBCF-JT06~JT09 1. In order to reduce the occurrence of electric shock, the supply line is connected between the fan and must be installed an all-pole Disconnect switch, (switch contacts opening distance requirements played a 3mm). If you lack of electrical knowledge, bo sure Please hold" electrician card" professional install it for you. 2.
PAGE 2
Installation of bracket Tools ready ·philips screwdriver ·Blade screwdriver ·Adjustable pliers or wrench ·Step ladder ·Wire cutter ·Electical tape ·Impact drill 1) To use wood screws to fix bracket for wooden or false ceiling. Wood screws Beam Parts inspection 1 2 6 7 1 6 2 5 2) To use expansion screws to fix bracket for concrete ceiling before that will need to drill dia.8mmexpansion bolts. 3 4 1H 4H 2H 8H 14 11 3 4 5 8 9 Expansion screw Fixed seat 12 10 15 13 Quantity NO. NO.
PAGE 3
Install the blades Installation of downrod & hanging ball 1) Fix the bracket and fan blade with screws in turn. (Figure 1) 2) Fix the fixed support blades on the motor in turn. (Figure 2) Installation of downrod & hanging ball 1.Lock the upper downrod pin and the "R" pin lock, and tighten the screws on both sides to fix them.
PAGE 4
Acrylic aluminum circle installation Hanging of ceiling fan 1. Turn the lifting head so that the groove is clamped on the lug on the hanger to stabilize the ceiling fan. (Figure1) Lug Groove Bubble acrylic Aluminum circle Figure 1 Remote receiver view 1.Place the foam acrylic aluminum ring at the bottom of the fan, align it with the three screw holes at the bottom, and tighten the screws using a screwdriver Live wire L (Black wire) Neutral wire N (White wire) (Ground wire) 2.
PAGE 5
Installation height Wiring of ceiling fan Input : 120V Neutral Wire N (White Wire) Live Wire L (Black Wire) Ground Line 20inch Motor white Wire (to receiver white Wire) 2.
PAGE 6
Ceiling fan troubleshooting solutions & common problems Controller line name ◆ RF wireless digital transmission (White wire) (Black wire) Live wire L (White wire) Neutral wire N (Yellow wire) Ground wire (Grey wire) technology,one-to-one control, the weight rate is less than one part of a million (if there is any damage, the controller and remote control must be sent back to the manufacturer for repair). (Blue wire) (Red wire) Can' t start 1.