Quick Start Guide

Getting Started Guide | MMBNetworks.com/BRD21
4. Press and Hold the ‘WIFI ON/OFF’ button for 5-20 seconds to start the BRD21 access
point. The WIFI Status LED will turn solid green once the access point is available.
5. Using your mobile device WIFI, search for the BRD21 SSID and connect.
6. Use the passphrase scanned earlier to connect and access the BRD21 using your
mobile device browser by going to 192.168.4.1
7. Go to MMBNetworks.com/BRD21 to learn more about the BRD21 and how to connect
to your Thread network.
Setup BRD21 OpenThread Mesh Extender
1. Download and set up a QR-Code Reader on your mobile device.
2. Using the reader, scan the QR Code on the front of BRD21.
3. Upload the TME’s device’s Thread joiner credentials to the BRD21 Thread Border
Router’s WebUI. If not using a BRD21 Thread Border Router enter the BRD21 TME’s
Rev 0.1 MMB Networks 2022 • BRD21 QSG