Headphones 3000 Series TAT3216 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your True wireless earphones 3 What's in the box Other devices Overview of your True wireless earphones 3 Get started 3 3 4 5 Charge the battery 5 Pair the headphones with your Bluetooth device for the fist time 6 4 Use your headphones 7 Connect the headphones to your Bluetooth device 7 Control ANC (active noise cancelation) 7 Manage your calls and music 8 LED indicator status 8 Voice Assistant 9 5 Reset the h
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your True wireless earphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips True wireless earphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Quick start guide Global Warranty Safety leaflet What's in the box Other devices A mobile phone or device (e.g.
Overview of your Bluetooth wireless headphones 6 1. Touch panel 2. LED indicator (headphones) 3. LED indicator (Charging case) 4. Multiple function button 5. LED indicator 6.
3 Get started Charge the battery Note Before you use your earpieces for the first time, place the earpieces in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB-C charging cable to avoid any damage. Finish your call before charging the earpieces, as connecting the earpieces for charging will power the earpieces off. Charging Place the headphones in the charging case and close the charging case cover.
The following example shows you how to pair the earpieces with your Bluetooth device. Turn on the Bluetooth function of your Bluetooth device, select Philips TAT3216. Enter the earpieces password “0000” (4 zeros) if prompted. For those Bluetooth devices featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your earpieces Connect the headphones to your Bluetooth device Turn on the Bluetooth function of your Bluetooth device. Open the top cover from charging box. The blue LED flashes. The earpieces will search the last connected Bluetooth device and reconnect to it automatically. If the last connected device is not available, the earpieces will enter pairing mode. Tip The earpieces cannot connect to more than 1 device at the same time.
LED indicator status Headphones status The earpieces are connected to a Bluetooth device. The earpieces are ready for pairing Indicator The earpieces are on but not connected to a Bluetooth device If no connection can be made after 1 minute, the headset will enter pairing mode for 2 minuets. The blue and white LED will flash. Low battery level (earpieces) You will hear 'battery low' on the headset.
5 Factory reset the headphones If you encounter any pairing or connection issue, you can follow the following procedure to factory reset your headphones. On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT3216 from the device list. Bluetooth device. Put both headphones back to charging case and open charging case cover. Press multiple function button on charging case for 3 times.
6 Technical data Earpieces Music time: 6 hours (additional 18 hrs wiht charging case) Talk time: 5 hours (additional 15 hrs with charging case) Standby time: 80 hours Charging time: 2 hours Rechargeable lithiumion battery: 55 mAH on each earpiece Bluetooth version: 5.0 Compatible Bluetooth pro les: • A2DP (Advanced Audio Distribution Pro le) • AVRCP (Audio Video Remote Control Pro le) Supported audio codec: SBC Frequency range: 2.402-2.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. Remove the integrated battery If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
8 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and Google Play are trademarks of Google LLC.
9 Frequently asked questions My Bluetooth headphones does not turn on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. Pairing does not work. • Put both earpieces into charging box. • Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices.
Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product. UM_TAT3216_00_EN_V0.
