Service manual

2. Overhauling
2-16
SDG65S-6A6
Engine model ISUZU EE-4BG1TRD-02
First time 50.6 [69 (700)]
Second time 65.1 [88 (900)]
Tightening torque of head bolts
lbw ･ ft
[N
･ m (kgf ･ cm)]
Third time 90°∼120° (Angle tightening)
Air intake in. (mm) 0.016 (0.4) [normal temperature]
Valve clearance
Discharge in. (mm) 0.016 (0.4) [normal temperature]
Firing order 1-3-4-2
Injection timing (BTDC) ° 9
Nozzle injection pressure psi (MPa) 2,631 (18.14）
Standard psi (MPa) 441 (3.04) [Rotation speed 200rpm (200min
-1
)]
Compression
Working limit psi (MPa) 313 (2.16) [Rotation speed 200rpm (200min
-1
)]
Temperature for
start of release
゜F (°C) 180 (82)
Full open
temperature
゜F (°C) 203 (95)
Thermostat
Valve lift in. (mm) 0.39 (10)
SDG100S-6A6
Engine model ISUZU EE-6BG1TRD-04
First time 50.6 [69 (700)]
Second time 65.1 [88 (900)]
Tightening torque of head bolts
lbw ･ ft
[N
･ m (kgf ･ cm)]
Third time 90°∼120° (Angle tightening)
Air intake in. (mm) 0.016 (0.4) [normal temperature]
Valve clearance
Discharge in. (mm) 0.016 (0.4) [normal temperature]
Firing order 1-5-3-6-2-4
Injection timing (BTDC) ° 9
Nozzle injection pressure psi (MPa) 2,417∼2,843 (16.67∼19.61)
Standard psi (MPa) 441 (3.04) [Rotation speed 200rpm (200min
-1
)]
Compression
Working limit psi (MPa) 370 (2.55) [Rotation speed 200rpm (200min
-1
)]
Temperature for
start of release
゜F (°C) 180 (82)
Full open
temperature
゜F (°C) 203 (95)
Thermostat
Valve lift in. (mm) 0.39 (10)