Owner manual

ManualsBrandsMMF POS ManualsEquipmentMagTek IPAD Stand

Transaction Terminal Stands (Transaction Terminal Stands (P/N:225P/N:225--75857585--0404) )

Quick Installation Instructions

Designed for MagTek® IPAD®

INSTALLATION

1. Remove stand from packaging box. Firmly secure the

base pole by bolting four (4) screws through the base

plate to a flat counter surface. (Screws are not

included as they need to suit your specific desktop or

platform thickness) .

2. Mount payment terminal to stand by aligning the two

holes in the bottom of the MagTek® unit to the two

holes of the stand’s mounting plate.

3. Secure the terminal by tightening the two 4-40 x 0.25”

button head cap screws behind the mounting plate

using the Allen Wrench provided in the kit.

4. Secure the stand’s tilt adjustment by tightening the

two side thumb screws on the mounting plate on

each side of the stand.

Basic Overview

Note: Images are not to scale.

Clearance Cable SlotThumb

Screw

2” Height Stand

P/N:225P/N:225--75857585--0404

Mounting plate

holes to secure

MagTek®

IPAD® terminal

to stand

(Screws

included in kit)

Thumb

Screw

each side of the stand.

5. Guide cable connections down and out through the

bottom opening.

6. Make cable connections as needed.

For parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com

TTS-04 Inst. Sheet (2-23-2011)

COMPANY, WHEELING, IL

TOOLS AND HARDWARE REQUIRED

• One (1) Allen Wrench is included with kit to tighten the

4-40 x 0.25” button head cap screws from behind the

mounting plate.

• NO other hardware or tools are included for mounting

stands to a surface. Hardware will need to suit your

specific desktop or platform thickness.

• Phillips Head Screwdriver or power drill will be required

to mount stand to surface (if necessary).

Re p l a c e m en t Pa r t s

Thumb Screw

P/N: 225-76140-04

SPECS

Rotation: 180°around display pole

Overall Height & Tilt Adjustment (without Terminal) :

•30⁰ Tilt= 4 ¾” high

•45⁰ Tilt= 5 ½” high

Pole Diameter: 2”

Base Dimensions: 5” x 5”

Construction: 18 gauge Steel

Finish: Textured powder coat

Cable Management: Designed with openings for easy and convenient

cable access and routing.

Color: Black