Owner's manual

ManualsBrandsMMF POS ManualsEquipmentVerifone VX810 & VX820 Handheld

Transaction Terminal Stand (P/N:225Transaction Terminal Stand (P/N:225--75917591--04) 04)

Quick Installation Instructions

Designed for Verifone® VX810

INSTALLATION

1. Remove stand from packaging box. Firmly secure the

base pole by bolting four (4) screws through the base

plate to a flat counter surface. (Screws are not

included as they need to suit your specific desktop or

platform thickness) .

2. Mount payment terminal to stand by sliding in place,

aligning the two holes in the top & bottom of the

Verifone® VX810 unit to the two holes of the stand’s

mounting plate.

3. Secure the terminal by tightening the two button head

cap screws behind the mounting plate using the Allen

Wrench provided in the kit.

Basic Overview

Note: Images are not to scale.

Clearance Cable Slot

Thumb

Screw

2” Height Stand

P/N:225P/N:225--75917591--0404

Holes to secure

Verifone®

VX810

terminal to

stand (Screws

included in kit)

Cable

Management Hole

BottomBottom

TopTop

4. Secure the stand’s tilt adjustment as desired by

tightening the two side thumb screws on the

mounting plate on each side of the stand.

5. Make cable connections as needed . Guide cable

connections down and out through the bottom

opening.

For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com

TTS-11 Inst. Sheet (11-6-2011)

COMPANY, WHEELING, IL

TOOLS AND HARDWARE REQUIRED

• One (1) Allen Wrench is included with kit to tighten the

button head cap screws from behind the mounting plate.

• NO other hardware or tools are included for mounting

stands to a surface. Hardware will need to suit your

specific desktop or platform thickness.

• Phillips Head Screwdriver or power drill will be required

to mount stand to surface (if necessary).

Re p l a c e m en t Pa r t s

Thumb Screw

P/N: 225-76901-04

SPECS

Rotation: 180°around display pole

Overall Height & Tilt Adjustment (without Terminal) :

•30⁰ Tilt= 4 ¾” high

•45⁰ Tilt= 5 ½” high

Pole Diameter: 2”

Base Dimensions: 5” x 5”

Construction: 18 gauge Steel

Finish: Textured powder coat

Cable Management: Designed with openings for easy and convenient

cable access and routing.

Color: Black

Designed for

Verifone® VX810