Instruction Manual

INSTALLATION
1. Remove Pole Display from packaging. Tightly secure the base
pole by bolting four (4) screws through the base plate to a flat
surface or by using the side-mount bracket.
2. Remove the 4” Mounting Arm from packaging. The 4” arm comes
preassemble.
3. Secure the mounting plate in front of the arm to the back of the flat
screen monitor by placing four (4) screws on the corresponding
VESA mounting dimension (75mm or 100mm).
4. With the monitor safely secured to the arm, place the arm on the
pole (as shown in illustration). The arm should rest on the dual
pem nuts on each side of the pole.
5. Secure the arm’s height and horizontal position by tightening the
thumb screw located in the back of the arm.
6. Secure the monitor’s tilt adjustment by tightening the two side
thumb screws behind the mounting plate on each side of the arm.
7. Remove top plastic cap from top of the pole and guide cable
connections down and out through the bottom opening.
8. Make cable connections as needed.
17" BASE DISPLAY POLE WITH 4"ARM 75/100MM KIT
P/N: 225-76110-04
Quick Installation Instructions
GENERAL SPECIFICATIONS
Rotation: 360° around display pole
Height: 17 in (43.18 cm)
Tilt Adjustment: +/- 45°
Pole Diameter: 2 inches
Maximum Load: Designed for LCD Monitors / touch-screens weighting
up to 30 lbs (13.60kg)
Display: Designed for VESA 75mm or 100mm mounting standard
Mounting Options: Flat surface or on side-mount bracket
Cable Management: Designed with top and bottom openings for easy
and convenient cable routing.
Color: Black
Please visit MMF POS on-line for FREE Technical Support or call 1-800-769-1954.
NOTE: For replacement parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com
TOOLS AND HARDWARE REQUIRED
• Hardware is NOT included. Hardware will need to suit desktop
or platform thickness.
• Phillips Head Screwdriver or power drill (if necessary)
Mounting
Plate
Base Pole
Thumb
Screw
Cable Hole
4” Mounting
Arm Display
Thumb
Screw
Plastic
Black
Cap
Side
Mounting
Bracket
Options/Replacement Parts
P/N: 225-76902-04
P/N: 225-76901-04
P/N: 225-76140-04
17“ VESA Display Pole Instruction Sheet (12/2009 Rev.1)