Owner's manual

ManualsBrandsMMF POS ManualsEquipmentVESA DISPLAY POLE HIGH TELESCOPIC 18 - 30

INSTALLATION

1. Remove Pole Display from packaging. Secure the base pole

tightly in place by bolting four (4) screws through the base plate to

a flat surface or by using the side-mount bracket.

2. Release the two side thumb screws and remove the top extension

pole by pulling it up.

3. Secure the mounting plate on top of the extension pole to the

back of the flat screen monitor by placing four (4) screws to the

corresponding VESA mounting dimension (75mm or 100mm).

4. With the monitor safely secured to the plate, place the top

extension pole back in the cavity of the base pole.

5. Secure the height by tightening the thumb screws located in each

side of the base pole.

6. Secure the monitor’s tilt adjustment by tightening the two screws

on each side of the U-Bracket Support behind the Mounting Plate.

7. Guide cable connections from behind the monitor through the top

cable hole and to the bottom opening of the base pole.

8. Make cable connections as needed.

FLEXIBLE POLE DISPLAY 18"-30” HIGH

P/N: 225-76120-04

Quick Installation Instructions

GENERAL SPECIFICATIONS

Rotation: 360° around display pole

Height: 18-30 inches (45.72cm - 76.2cm)

Tilt Adjustment: +/- 180°

Pole Diameter: 2 inches (Base)

Maximum Load: Designed for LCD monitors / touch-screens weighting

up to 30 lbs (13.60kg)

Display: Designed for VESA 75mm or 100mm mounting standard

Mounting Options: Flat surface or on side-mount bracket

Cable Management: Designed with top and bottom openings for easy

and convenient cable routing.

Color: Black

Please visit MMF 326 on-line for FREE Technical Support or call 1-800-769-1954.

NOTE: For replacement parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfSRV.com

TOOLS AND HARDWARE REQUIRED

• Hardware is NOT included. Hardware will need to suit desktop

or platform thickness.

• Phillips Head Screwdriver or power drill (if necessary)

Mounting

Plate

Top

Extension

Pole

Base Pole

Thumb

Screw

U-Bracket

Support

Cable Hole

Side

Mounting

Bracket

Thumb

Screw

4” Display

Arm

Options/Replacement Parts

P/N: 225-76140-04

P/N: 225-76130-04

P/N: 225-76901-04

18"-30" VESA Display Pole Instruction Sheet ( 12/2009 Rev.1)

Summary of content (1 pages)

PAGE 1
FLEXIBLE POLE DISPLAY 18"-30” HIGH P/N: 225-76120-04 Quick Installation Instructions INSTALLATION Options/Replacement Parts U-Bracket Support Side Mounting Bracket P/N: 225-76140-04 Top Extension Pole Thumb Screw P/N: 225-76901-04 1. Remove Pole Display from packaging. Secure the base pole tightly in place by bolting four (4) screws through the base plate to a flat surface or by using the side-mount bracket. 2. Release the two side thumb screws and remove the top extension pole by pulling it up.