User Manual

Thermoelectric Cooler - English manual
5
EN
CONTROL
It is recommended you install the winecooler in a place where the
ambient temperature is between 23°C-26°C/72 -78°F. If the ambient
temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your
unit in extreme cold or hot conditions may cause interior temperatures
to uctuate. The range of 12-18°C may not be reached.
Temperature Ranges For Your Cooler:
Temperature Range 12-18°C
CONTROL PANEL
Temperature & light
1. Quik press the button once for the interior light to turn ON or OFF.
The light will be turned off automatically if it remains ON for 10
minutes
2. You can select the temperature display setting from Fahrenheit to
Celsius degree by pushing this button for two seconds.
Lock
Press and hold the button for 2 seconds to unlock the control panel. You
will hear a “BEEP” sound to alert you that the control is now active.
Temperature up & down
After unlocking you can set the temperature as you desire by pressing
the arrow pointing up (increase) or the arrow pointing down (decrease)
to adjust the temperature in 1 increment.
Note:
When you use the cooler for the rst time or restart the cooler after
having been shut off for a long time, there could be a few degrees
variance between the temperature you select and the one indicated on
the LED readout. This is normal. Once the cooler runs for a few hours
the display will stabilize.