User Manual
Thermoelectric Cooler - English manual
7
EN
Power supply
1. The cooler must be connected to a properly earthed socket in line
with relevant valid country regulations before operating;
2. Check the data label (which is on the side of the cooler) for voltage
and frequency corresponds to your local one; If not, don’t plug your
cable into the socket;
Product cleaning
First, please use this for the rst time, please remove the tape for xing
the xture in the box, and wipe with a soft cloth. Please rinse the water
thoroughly and remove the moisture.
Product function description
1. This refrigerating appliance not suitable for storing food.
2. This refrigerating appliance is not suitable for freezing food.
3. This refrigerating appliance is recommended to be designed at
17°C.
4. The shelves placed in factory mode is the most efcient use of energy
for the refrigerating appliances.
5. The following combination of shelves is recommended for energy to
be used as efciently as possible by the refrigeration unit.
6. When the surrounding temperature is 25’C and the pantry has
no load, it will take around 60 minutes to decrease the pantry’s
temperature from 25°C to 17°C.
7. This refrigerating appliance is recommended to be designed
at 17°C. The energy consumption is 0.211kWh/24h. If the set
temperature is higher than 17°C, the energy consumption will be lower.
If the set temperature is lower than 17°C, the energy consumption will
be higher.
8. Defrosting procedure: When the semiconductor refrigeration piece
works for 24 hours, power off and stop defrosting for 10 minutes.