User's Manual

CAMERA OPERATIONMONITOR OPERATION

LCD On/O

Press the Mode Buon and hold for 3 seconds unl the LCD screen is o. This

feature enables you to use the monitor as an audio only system allowing you to

conserve power.

To deacvate, press the Mode Buon for 3 seconds.

Brightness Control

The brightness on the LCD screen can be adjusted by pressing the Mode buon

2 mes and using the “+ “& “–“ control buons (g. 2) unl the desired level is

reached.

Voice Acvaon (VOX)

Voice Acvaon (VOX) mode allows your monitor to go to sleep mode when

there is no sound in the room. The monitor will automacally turn on when the

camera detects noise– subject to the factory preset sound level. This feature

allows you to conserve baery power.

NOTE: The Monitor will automacally switch to standby mode if no signal is received

from the Camera

To Acvate / Deacvate: Press the Mode buon3 mes and the VOX icon will

appear. Your monitor will display “VOX” when this feature is turned on. Use the

“ + “ & “ - “ control buons (g. 2) to turn the funcon on or o.

Mode buon