Meijer.
Meijer.com User’s Manual for DualScan™ Prime Digital Thermometer INTRODUCTION Thank you for purchasing the DualScan Prime Thermometer from Mobi Technologies, Inc. The thermometer has been carefully developed for accurate, safe and fast human body temperature measurements from forehead or ear readings and object temperature measurements to ensure safe temperatures. SAFETY PRECAUTIONS Research indicates that the ear is an ideal site for taking body temperature.
Meijer.com SAFETY PRECAUTIONS (cont.) t Earwax in the ear canal or lipid on the forehead may cause an inaccurate measurement, so make sure the ear canal or forehead is clean. KEEP INFRARED SENSOR CLEAN t If you clean the ear or forehead, please wait 5~10 minutes before measuring. t Don't touch or blow on the infrared sensor. A dirtied infrared sensor may cause inaccuracy.
Meijer.com 4"'&5: 13&$"65*0/4 DPOU t Don't take apart, repair or change any parts of the unit at any time. t Don't use a mobile phone nearby when the thermometer is working. If your thermometer will not be used on a regular basis, remove batteries to prevent possible damage due to chemical leakage. If battery does leak, remove carefully. t Do not allow bare skin to touch leaking fluid.
Meijer.com PACKAGE COMPONENTS DualScan Prime Thermometer 1.
Meijer.
Meijer.com NOTES BEFORE USE 1. To achieve accurate measurements, it is very important to ensure that the infrared sensor is clean before using. To clean the sensor, gently wipe its surface with a cotton swab slightly moistened with alcohol and immediately wipe dry with a clean cotton swab. After cleaning, allow at least 20 minutes drying time before taking temperatures. 2.
Meijer.com TO MEASURE FOREHEAD TEMPERATURE 1. Be sure Forehead Probe Cover is snapped onto the unit before scanning. Place the thermometer in your hand as shown here with your thumb tip resting lightly on the Forehead Button. Before you press the button, make sure the Infrared Sensor Tip is clean. ME M 2. Hold the thermometer so that the end of the Forehead Probe Cover is placed flush to skin surface midway between the eyebrow and hairline.
Meijer.com TO MEASURE EAR TEMPERATURE 1. For Ear Scans, remove Forehead Probe Cover before use. Place the thermometer in your hand as shown here with your thumb or forefinger tip resting lightly on the Ear Button. ME Before you press the button make sure the Infrared Sensor Tip is clean. M SE T 2. Insert the Ear Probe very gently and slowly into the ear canal. Hold the thermometer so that the Infrared Sensor Tip of the Ear Probe faces straight in the direction of the Ear Canal.
Meijer.com TO MEASURE FOOD / OBJECT TEMPERATURE 1. Remove Forehead Probe Cover. Hold the thermometer in your hand (as shown) with your finger tip on both the Ear Button and Forehead Button. Press the buttons simultaneously to enter into the Food / Object Mode and the display will indicate this when you see... Press Both Buttons Note: Make sure to not use the Food / Object Mode to measure body temperature. Scan within 1/2 inch (1cm) 2.
Meijer.com TEMPERATURE TAKING HINTS 1. A temperature measurement taken in the right ear may differ from a measurement taken in the left ear. Therefore, always take the temperature in the same ear. 2.
Meijer.com CLEAN TIP ALERT As a reminder to clean the probe tip, there is a special “Clean Tip Alert”. When you have not used the thermometer for a long time, or you have taken temperature readings multiple times, the backlight will flash for 1minute to remind you to clean the probe tip. Also, the LCD Display will show the letters “CL” along with a beeping sound. The thermometer will return to original mode after you press any button, and the Clean Tip indicator will stop flashing.
Meijer.com PREVIOUS READOUTS IN MEMORY The thermometer records and stores a total of nine (9) Memory Readouts of previous Ear and/or Forehead temperature measurements. The most current measurement is always saved in the last available space. Once all nine storage spaces have been occupied, with the next reading the oldest stored readout is deleted from memory as the new one is saved.
Meijer.com SETTING TIME AND DATE Press and hold the Settings Button for about 2 seconds to enter into the Settings mode. Press the Settings Button again to go to the Time / Date format and select 12hr or 24hr mode. Note: PM will display on screen when in 12hr format. Then select Hour, Minute, Year (2001~ 2099), Month, Day and whether Sleep Mode is ON or OFF. When the Sleep Mode is active, the thermometer will turn OFF automatically after 1min to 3min (depending on the factory default).
Meijer.com REPLACING THE BATTERIES When the Low Battery Indicator appears on the screen, or the thermometer does not function at all, you should replace the batteries immediately. Note: The thermometer is pre-loaded with two (type AAA) batteries, so remember to remove the plastic tab from the battery connections as shown earlier before initial use. To replace low or dead batteries, remove the Battery Cover by sliding it toward the bottem end of the thermometer.
Meijer.com THERMOMETER SPECIFICATIONS Power supply: DC 3V (2*AAA) Body measuring range: 32.0°C ~ 42.9°C (89.6°F ~109.3°F) Ear and forehead measure accuracy: ±0.2°C (±0.4°F) in range of 35.5°C~42.0°C (95.9°F~107.6°F) ±0.3°C (±0.5°F) for other ranges below or above Object measuring range: 20.0°C (68.0°F)~ 60.0°C (140.0°F) Object measure accuracy: ±1.0°C (2.0°F) Displayed room temperature range: 5.0°C ~ 59.9°C (41.0°F~139.
Meijer.com CARE AND CLEANING VERY IMPORTANT: To ensure accurate measurements, keep the probe tip clean and free of scratches, finger prints, earwax or dirt, or they will effect the accuracy of the thermometer. To clean the probe tip, gently wipe the clear surface with a cotton swab slightly moistened with alcohol and immediately wipe dry with a clean cotton swab. To clean the body of the thermometer, use a soft dry cloth.
Meijer.com EXPLANATION OF SYMBOLS Type BF Applied part Disposal in accordance with Directive 2002/96/EC (WEEE) The name and the address of the manufacturer The name and the address of the authorised representative in the European Community 0197 Complies with the European Medical Device Directive (93142/EEC) and amended by directive 2007/47/EC requirements. Notified body TUV Rheinland (CE0197) Refer to Instruction Manual.
Meijer.com TROUBLESHOOTING Problem Checklist Countermeasures No response / automatic reset when pulling out plastic insulator tab. Batteries low or dead? Batteries installed in wrong polarity? Poor battery contact? Change to new batteries. Remove batteries and reinsert batteries correctly. Measured temperature is lower than 32.0°C / 89.6°F or higher than42.9°C / 109.3°F Follow steps in User's Manual for proper measurement. Check the operation method.
Meijer.com TROUBLESHOOTING (cont.) Problem Checklist Countermeasures The measurement is not accurate or there is doubt of measurement results. Check to see if the infrared sensor is clean or not. Clean the infrared sensor with cotton swab according to the User’s Manual. Determine whether your measuring method is correct or not. Ensure you have read the User’s Manual and know how to use the thermometer properly.
Meijer.com PROPER DISPOSAL Dispose of the batteries in accordance with current federal, state and local regulations. As a consumer, you may be obligated by law to recycle used batteries. t *O BO FOWJSPONFOU JO XIJDI UIFSF JT FMFDUSPTUBUJD discharge, the unit may malfunction and may require user to reset the unit. t %JTQPTF PG BOZ FMFDUSPOJD EFWJDF XJUI DBSF consult the manufacturer for details.
Meijer.com LIMITED WARRANTY Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair.
