User`s manual

The device is intended for use in. the electromagnetic environment specified

below. The customer or the user should assure that it is used in such an

environment.

Conducted R

F lEC 61000-4-6

Portable and mobile RF

Communications equipment should be

used no closer to any part of the device,

including cables, than the recommended

separation distance calculated from the

equation applicable to the frequency of

the transmitter. Recommended

separation distance.

3 V

3 V/m

NOTE I At 80 MHz ends 800 MHz. the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation

is affected by absorption and reflection from structures, objects and people.

3 Vrms

150 kHz to

80 MHz

Radiated RF lEC

61000-4-3

3 V/m

80 MHz to

2.5 GHz

80 MHz to 800 MHz

800 MHz to 2.5 GHz

Where P is the maximum output power

rating of the transmitter In watts (W)

according to the. Transmitter

manufacturer and d is the recommended

separation distance in meters (m).

Field strengths from fixed RF

transmitters, as determined by an

electromagnetic site survey,a should be

less than the compliance level in each

frequency range.b

Interference may occur In the

vicinity of equipment marked

with the following symbol:

a Field strengths from fixed transmitters, such as base stations for radio (cellular/

cordless) telephones and land mobile radios, amateur radio, AM and FM radio

broadcast and TV broadcast cannot be predicted theoretically with accuracy. To

Guidance and manufacturer's declaration - Electromagnetic immunity