User`s manual

System Requirement
Getting Started
Recharge
Getting Started
1.Connect the device into a
PC using the USB cable
supplied in the package.
2.Recharge is in process while
downloading or uploading files.
4.Disconnect the USB cable at the completion of the
recharge. (See Page 21)
It takes approximately 3 hours to completely recharge a fully consumed
battery.
“Complete” will display if you press at the completion of the recharge.
Recharge the device using the USB cable when the display is not
activated.
If the Hold key is activated in recharge process, the USB connection is also
activated to down/upload the files.
3.Press shortly in
‘Pause/Stop’ to check
the recharge process.
System Requirement
The minimal requirements for the PC to support the product are as
followings;
Microsoft OS (Windows 98SE, ME, 2000, XP)
CD-Rom Drive
Pentium 200MHz or higher version
RAM 32MB (64MB or more for Windows ME or higher version)
More than 128Mb free space in the hard disk (additional space is
required to save more music files)
USB port (Ver. 1.1 and 2.0)
Mac 9.X~X