User`s manual

52
Music recording (Line - in)
Recording
51
Voice Recording
Recording
Press
and hold
to move to
“Voice’
Press
to enter
“Voice”
to start
recording
Press in recording to pause the recording and press again to
resume.
Press to listen to the recorded file.
Recorded files are stored in MP3 format in the VOICE folder in the
following sequence; VC001.MP3, VC002,MP3...
Press and hold in Music Play mode (stop) to get into Recording
ready mode.
You may save the memory by recording only necessary parts with the
aid of sound source detection function. (See P.74)
The recording will be interrupted when the memory gets full. The
recorded voice source only is stored in the memory in this incident.
Sound quality may vary according to the distances from the sound
source.
In the case where the power is not enough to run the device, the
recording may not be performed correctly.
to stop the
recording
Connect the device into the external audio player with the Line-in cable
supplied in the package.
Analog sound signals can be converted to digital sound by
recording the external audio sources with the Line-in cable
supplied in the package.
With the aid of earphone, you may listen to the music which is
being recorded to the device (Loop back).
When there is no sound source detected for more than
1.5seconds in the recording, the device will get ready for another
file recording. (See Page 75)
Press Press
Press
Record
elapsing
time
Record
remaining
time