User manual

Software Installation

Simple Use of the Player

After disconnecting the USB cable from the player, press PLAY button ( II) to turn

the power on. Press the Play button again to listen to your music. (Blue LED keeps

blinking)

Enjoy digital sound with an earphone or by inserting the player into an audio deck.

Push the earphone jack completely into the player

If the player does not start even when pressing The PLAY

(

II) button with the slide switch in “MUSIC” position, press

the PLAY (

II) button. Remove and replace the battery By

doing this, the player may work correctly after rebooting itself.

Don’t use the player simultaneously with other USB

connections such as a digital camera or a scanner to prevent

any possible communication error.

Visit our webpage for more information.

Please Note!

With the Mass Storage Function of the player files can be

downloaded / uploaded without using any software

installed in the PC.

To update and format the player please follow below

procedure;

- When using Windows 98SE: Install the software from the CD before using the

player. (The PC can not recognize the player)

- When using Windows ME, 2000 and XP: Install the software to format the player.

Software Installation

The software will automatically run showing language selection

box by inserting the CD to the PC. Click on OK after selecting the

language.

Click!