User manual

TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu
touch a Menu Icon ... to open a Function Screen ... to check or change a Function
touch a Menu Icon ... to open a Function Screen ... to check or change a Function
!
!
!
SETTINGS (cont.)
!
!
!
!
Language
!
!
!
!
!
!
!
!
!
!
Language
!
!
!
!
!
!
!
!
!
!
Language
!
!
!
!
!
!
!
!
!
!
Language
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
English
French
German
Portuguese
Spanish
Italian
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Language
!
Monitor Setting (cont.)
!
From the Monitor Setting list...
NOTE: Though shown here for referen-
ce, SD Card Update is to be used ONLY
for Updating System Firmware,
which would be downloaded and put
onto an SD card in order to be installed
using this option. Specific instructions
will be provided to registered users
regarding any new firmware.
!
!
From the Monitor Setting list...
touch Language
touch one of the 6 specific Lang-
uages you want the monitor to
show in all text displays
!
!
!
!
!
From the Monitor Setting list...
touch Factory Default
choose OK to reset all settings,
or Cancel if you change your
mind
!
!
!
!
!
From the Monitor Setting list...
touch About & Version
here you will see the product
name and manufacturer, and
the latest version of the installed
firmware
SETTINGS (cont.)
Camera Settings
on the Setting Screen, simply touch
the Camera icon (on the bottom
line) for the one you wish to control
the settings for...
NOTE: Only Paired camera icons
will show in color and be active
for touch control.
!
!
From the Camera Setting screen...
touch Temperature/Alarm
set
º
F or
º
C (default is ºF)
touch the thermometer icon
set the maximum and minimum
alarm temperature range
set the Alarm to be On or Off
if On, set the Alarm Time (from 5
to 60 seconds)
!
NOTE: When the room temperature
(where the camera is) goes above or
below the temperature range you
set, the monitor will sound an alarm
and the small Temperature icon on
the monitor screen will flash showing
the out-of-range temperature in that
room. The ESC Button will temp-
orarily silence the repeating alarm
until the temperature returns to the
set range, or you turn the Alarm Off
from this screen.
!
!
From the Camera Setting list...
touch Tx Power/Volume
adjust the Camera Speaker
Volume (top icon) up or down for
the Two-Way Talk function
set the Transmit Range Power
(lower icon) on High or Low
!
!
!
HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
!
!
14
HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
!
!
15