User's Manual

Select the discovered Bluetooth PDA and click the third button on the right to pair with it.
Note: The pairing process is a way to authenticate the connection of two Bluetooth devices. In order to connect wi
t
users must use MA-730 Bluetooth Manager to pair with Bluetooth PDAs. MA-730 Bluetooth only needs to pair
once to establish bond. If the Bluetooth connection is removed, then MA-730 Bluetooth must pair with the Bluet
o
After you have selected the third button to pair with the Bluetooth PDA, a messa
g
e will pop up
o
to ask if you want to pair with PC-MABT. Please select Yes on the Bluetooth PDA to continue p
a
another message will pop up on the Bluetooth PDA to request the passkey, please enter the De
f
1. as you have seen on the MA-730 Bluetooth Properties. The selected Bluetooth PDA is pai
r
Bluetooth.
Note: Pocket PC users must connect with ActiveSync to start data transmission. Palm OS PDA users must connect
transmission.
Step 4. Remove the Bluetooth PDA from the list
In some cases, you can use the fourth button on the ri
g
ht to remove the Bluetooth PDA from th
e
select Yes if you want to remove the Bluetooth PDA that was paired previously.
第 11 頁，共 11 頁Config handset
2007/4/23file://C:\Documents and Settings\RF-ASSISTANT\Local Settings\Temp\~hh4238.htm