User's Manual

Step 2. Discover the Bluetooth handset
2.1 Activate the Bluetooth function of the handset and set the handset to be discoverable or vi
s
2.2 Then click the second button on the right to find Bluetooth handsets in the neighborhood.
Results of discovered Bluetooth handsets:
means the Bluetooth handset has been paired with MA-730 Bluetooth previously but is n
o
Bluetooth handset is turned off at the moment or the Bluetooth function is not activated. T
h
be out of the communication range.
means the Bluetooth handset is discovered.
Note: Some Bluetooth handsets can set to be discoverable or visible for a few minutes and then the Bluetoot
h
save power. Please check if Bluetooth handsets are activated to discoverable mode.
Step 3. Pair with the Bluetooth handset
Select the discovered Bluetooth handset and click the third button on the right to pair with it.
After you have selected the third button to pair with the Bluetooth handset, a messa
g
e will pop
handsets to ask if you want to pair with PC-MABT. Please select Yes on the Bluetooth handset
t
Then, another messa
g
e will pop up on the Bluetooth handset to request the passkey, please en
t
Step 1. as you have seen on the MA-730 Bluetooth Properties. The selected Bluetooth hand
s
Bluetooth.
Note: The pairing process is a way to authenticate the connection of two Bluetooth devices. In order to connect wi
t
must use MA-730 Bluetooth Manager to pair with Bluetooth handsets. MA-730 Bluetooth only needs to pair w
i
establish bond. If the Bluetooth connection is removed, then MA-730 Bluetooth must pair with the Bluetooth han
Step 4. Run Handset Manager software
For Bluetooth handset users, please click the fifth button on the ri
g
ht to connect the handset wi
t
第 2 頁，共 11 頁Config handset
2007/4/23file://C:\Documents and Settings\RF-ASSISTANT\Local Settings\Temp\~hh518F.htm