User's Manual

36
page
Common
37
page
Common
112
112
Map screen of current location (during route guide)
1 Remaining battery
Displays the remaining battery.
2 Clock
Displays the current time.
3 Destination information button
Displays the distance to the destination,
expected arrival time, and duration.
Switches between expected arrival time
and duration each time you press.
4 Compass button
Switches the map orientation.
Switches between north up and heading
up each time you select.
7 : 3D heading up
Displays the map (3D) so that the
direction of travel is at the top of
screen.
7 : 2D heading up
Displays the map (2D) so that the
direction of travel is at the top of
screen.
: 2D north up
Displays the map (2D) so that north on
the map is at the top of screen.
5 Bluetooth button
Displayed when a cell phone's hands free
set is connected by Bluetooth.
7 : The call screen appears when this
button is selected while the phone is
ready to make a call.
7 : The disconnect screen appears when
selected while the phone is busy.
6 Zoom button
Zooms in/out the map.
[–] : Shows a wider area map.
[+] : Shows a more map details.
7 Speed limit information
Displays the speed limit of the street you
are traveling.
You can turn off the speed limit display.
612
note
• See
207
,
208
or
302
for information on how to start the route guide.
• Select
on each screen of this device to return to the above current map screen.
• The source name is not displayed when all sources are off. Also, the external source connected to AV-in is not
displayed.
• The speed limit information and road information are not displayed if the information cannot be obtained.
• x is displayed when the radio signal from the GPS satellite cannot be received. The current location is not
displayed correctly under this condition.
• When the map direction is heading up, the vehicle symbol is displayed lower than the center of the screen.
When the map direction is North up, the vehicle symbol is displayed at the center of the screen.
• Orient this device vertically when the map direction is heading up to display more of the map in the traveling
direction for greater convenience.
• If the current traveling speed exceeds the speed limit, the speed limit information flashes as a warning.
You can turn off this warning.
612
• When you turn on the PNX-7/PNX-5, you must wait while the system acquires satellite signals. This process
could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings
and trees for fastest acquisition.
8 AV quick control button
The button display changes in the order of
[OFF] = [NAV] = Current AV source name
= [OFF] each time you select the button.
Switch to [NAV] to display road
information.
Switch to the current AV source name to
display the AV quick control mode button.
111
9 Road information
Displays the name of the road you are
traveling.
Select to display the name of the road you
will travel next.
0 Destination Direction Finder
Shows the approximate direction of the
destination.
- Vehicle symbol
Displays the current position.
= Menu button
Displays the Top Menu.
115
~ Map
Displays the map around the current
location.
Touch the map to switch to scroll map
screen. Touch once more to scroll the map
so that it is centered around the touched
location.
Keep on touching the map to switch to
scroll map screen and scroll the map in
the touched direction. Release to stop
scrolling.
The current map screen is displayed as follows during route guide (current map screen).
Current map screen (during route guide)
<NM2000>
1 234
~
=-098
7
6
5