User's Manual

44
page
Common
45
page
Common
116
Tour rout and drive route
116
■ What is a tour?
A tour route starts from the current location, passes through several intermediate destinations,
and arrives at the final destination.
A tour route consists of 0 or more intermediate destinations and one or more final destinations.
■ Setting a tour route
A relatively short distance tour such as stopping over at Heathrow Airport to pick up John,
passing through Tower of London (intermediate destination) and Buckingham Palace and
bringing him home is referred to as Short Tour.
In the above example, London International Airport, Tower of London, and Buckingham Palace
are intermediate destinations and home is the final destination.
On the other hand, a relatively long distance tour starting from home in London, stopping at
University of Paris to pick up Michelle, and attending a conference at the University of Naples is
referred to as a Round trip tour.
In the above example, University of Paris and University of Naples are destinations.
On this device, the method of setting up a tour route is different between Short tour and Round
trip tour.
÷ Setting a Short tour route
To set a Short tour route, search the location with the method described below
202
and set
that location as the intermediate destination or final destination.
÷ Round trip tour
Select [Plan Tour] from the Route Menu to start setting the Round trip tour route
302
, search
location by various method
202
, and set as destination.
■ Editing the tour route
You can also edit an already created tour route by changing the order of intermediate
destinations and adding or deleting intermediate destinations.
■ Searching for drive route
Searching the route to drive along the tour route is referred to as route search and the searched
route is referred to as the drive route.
In the case of short tour, drive route search is started automatically when you set the final
destination. Also, when you set intermediate destinations, select [Calc Route] on each screen to
start.
In this case, the drive route along the entire trip from the current location (start location) to the
final destination is searched.
In the case of round trip tour, select [Calc Route] on each screen to search the drive route
from the current location (start location) to the destination (Destination 1). When you reach
Destination 1, the drive route from Destination 1 to Destination 2 is searched.
■ Setting the drive route search condition
You can set the restrictions (left/right turns, toll roads/express ways) when searching the drive
route.
You can also select the drive route type (give priority to distance or travel time).