Quick Start Guide

13
Operation
Switching the ignition on automatically activates the “driving
mode”, and the drive is recorded on the uSD card. Switching the
ignition o󰀨 automatically activates the “parking mode”, in which
the vehicle is monitored by means of radar and a vibration sensor.
Initial Operation
Please insert the micro-SD card into the device. It may only be
inserted while the camera is turned o󰀨, as otherwise the data can
be corrupted and a malfunction can occur.
Coupling With A Smartphone
In principle, the UTR can be operated with the basic settings even
without a connection to a smartphone. Acoustic signals keep you
informed of the operating condition of the UTR.
To use the UTR with your smartphone (iOS or Android), please
download the "AUDI UTR" app free of charge from the respective
app store - iTunes (iOS) or Google Play Store (Android). In order to
couple your smartphone with the UTR, activate the Wi-Fi function
in your phone and connect to the hotspot (SSID) AUDIUTR. The
default Wi-Fi password is: 1234567890.
Please change the default password immediately under AUDI
UTR App>Settings>Wi-Fi>.
After changing your password, you must log in with the new
password to the Wi-Fi hotspot (SSID) "AUDIUTR".
You can nd the detailed manual with an explanation of each
function in the smartphone app under “Software”.
Time Setting
The UTR automatically sets the time and date using GPS time
(UTC). Adaptation to your time zone and daylight savings time is
done by synchronization with the time of your smartphone.
Now, your device is ready for use!