Quick Start Guide

14
Operating Modes
Driving Mode
The driving mode is automatically started when you start the engine.
Now, video les of one minute length each are being saved on the
SD card.
Memory Allocation
Manually Switching On And O󰀨
The memory card is partitioned into separate areas (Driving, Parking,
Event) by the system. In each partition, the oldest video le at a time
is overwritten by the latest one. For that reason, please make a copy
of the data when something happens. You can download the data
to your smartphone via the UTR app, or remove the SD card (after
turning o󰀨 the device) to prevent overwriting the les. When you edit
the SD card on the PC and then use it again with the camera, the SD
card is formatted. This means that any existing videos will be erased!
A short press of the ON/OFF button switches the device ON.
To switch it OFF, please press and hold the button down longer
(minimum 3 sec.).
Parking Mode
The parking mode is started when you turn o󰀨 the ignition.
In case of a shock to the car or a movement in front of the radar
sensors, a 20 second video le is saved.
Event Recordings
When your car is shaken harder than the set value of the G-Sensor,
separate video les are saved on the SD card in the folder “Event”.
You will recognize the beginning of an event recording at the double
beeping sound.
The sensitivity of the G-Sensor can be adopted in 5 levels.