User Manual

Document Name: iRISupply™ User Guide
Published: 07/20/11
Version 2.4
8 of 65
The following Warning Messages will appear in this user guide to warn of potential hazards or to call
attention to information that clarifies or simplifies a procedure. The instruction given below should be
followed at all times.
Prior to installation and maintenance always unplug iRISUPPLY™ from the
power outlet.
Unplug iRISUPPLY™ from its power source prior to making any wiring
changes.
Environmental Conditions
Normal environmental conditions
This standard applies to equipment designed to be safe at least under the following conditions:
1. Indoor use
2. Altitude up to 2 000 m
3. Temperature 5 °C to 40 °C
4. Maximum relative humidity 80 % for temperatures up to 31 °C decreasing linearly to 50 %
5. Relative humidity at 40 °C;
6. MAINS supply voltage fluctuations up to +/-10 % of the nominal voltage;
7. Transient overvoltages typically present on the MAINS supply.
Note: The normal level of transient overvoltages is impulse withstand (overvoltage) category II
of IEC 60364-4-443.
8. Applicable RATED POLLUTION degree 2.
Maintenance and Cleaning
iRISUPPLY™does not require any electrical or mechanical maintenance. Should any issues occur, the
cabinet should only be serviced by authorized personnel from Mobile Aspects. On a regular basis, the