User Manual

Environmental Conditions
Normal environmental conditions
This standard applies to equipment designed to be safe at least under the following
conditions:
1. Indoor use
2. Altitude up to 2 000 m
3. Temperature 5 °C to 40 °C
4. Maximum relative humidity 80 % for temperatures up to 31 °C decreasing
linearly to 50 %
5. Relative humidity at 40 °C;
6. MAINS supply voltage fluctuations up to +/-10 % of the nominal voltage;
7. Transient overvoltages typically present on the MAINS supply.
Note: The normal level of transient overvoltages is impulse withstand
(overvoltage) category II of IEC 60364-4-443.
8. Applicable RATED POLLUTION degree 2.
Maintenance and Cleaning
iRISCOPE™ does not require any electrical or mechanical maintenance. Should any
issues occur, the cabinet should only be serviced by authorized personnel from
Mobile Aspects. On a regular basis, the cabinet should be cleaned with a warm,
damp cloth containing a mild liquid detergent. Avoid using abrasive cleaners and
aromatic solvents, especially on the door glass since it may cause scratches.
Electrical Rating
iRISCOPE™ 1.0 requires a single 120V/60Hz AC grounded receptacle (Type
5-15R).
Input voltage: 120-240 Vac
Frequency: 60 Hz
Current Rating: 6 A
Replace only with the following fuses: 5 x 20 mm, Time Delay, 250 V, 10 A
viii