User Manual

Field Description
Load Washer
Solution Solution selected for washing.
Expiration
Date
Date of expiration for the selected solution.
The date is displayed in mm/dd/yy format.
Activation
Date
Date of activation for the selected solution.
The date is displayed in mm/dd/yy format.
Strip Exp
Date
Date of expiration for the test strip.
The date is displayed in mm/dd/yy format.
Test Date Date of which the solution was tested.
Scan Scopes to Load into Washer
Model No Model number of the scope loaded into the
washer.
Serial No Serial number of the scope loaded into the washer.
Description A brief description of the scope.
Manufacturer Name of the company manufacturing the scope.
Cleaning
Cycle Since
Last Repair
Number of times the scope was used after last
repair.
TABLE 3: FIELD DESCRIPTION
7. When the scopes are loaded into the washer, press Done.
4.4 Unloading Washer
You can use this option when you remove a scope from the washer.
When you remove the scope from the washer, the iRISCOPE
TM
system has to be
notified about the completion of cleansing process. This can be accomplished by
using an RFID scanner.
To unload washer
1. Navigate to the Reprocessing Station Main Menu screen shown in the
following illustration.
Reprocessing Station 43