User's Manual

Mobile Aspects, 2017
Page 4
1. Introduction
1.1 Purpose of the document
The purpose of this internal document is to provide work instructions on how to install the printer main
controller and printer antenna inside a console and printer.
2. Installation Instructions
2.1 Printer Main Controller
Printer main
controller
location inside the
console
1) With a hex driver, install
the printer main controller
using 6-32 button head
screws.
2) Connect the ribbon ribbon
cable from the printer
controller to the
motherboard.
3) Connect the 4-pin ATX
cable from the power
supply to the printer
controller.
Motherboard
Printer Controller
Power
Supply
Ribbon Cable