User's Manual

24 25
Power sources
It is important that a “clean” source of power is used for the
supply to the modem
Fuse replacement
We recommend an inline “quick blow” fuse rating of 4 amps
be fi tted to the +ve supply.
Cabling
If possible, run RF cables separately from other cables
and keep RF cables apart from one another to avoid
interference / coupling.
When fi tting the modem into a fi xed installation care must
be taken in the routing of all cabling such that the insulation
cannot become damaged.
Fixing
We recommend that the me-d200/d350 is securely fi xed
to a surface, either directly, or with a suitable bracket. The
fi xing hole centre dimensions are as shown.
The modem can be attached to any surface by using
suitable size screws through the M3.5 holes in the
mounting fl anges.
52.045mm +/-0.305
108.763mm +/-0.0762
3.5mm Clearance
50.06mm +/-0.250
108.763mm +/-0.0762