Owner's Manual

PACK THE BOX
3
A
B
C
D
E
F
A. Foam Top
B. Dustcover
C. Turntable
D. Foam Base
E. Inner Box
F. Outer Box
Foam Platter Cover
Additional Parts Canisters
(Wrench, Anti-Skate, Brush)
Counterweight
Delrin
‰
Platter
(Upside Down)
Power Cord
RCA Interconnects
TURNTABLE REPACKING GUIDE (v2)
Please use all of the original packaging
Wrap dustcover with supplied plastic
bag before packing the box
PREPARE FOR SHIPPING
2
• Platter and platter belt
• Cables
• Counterweight
• Anti-skate weight
REMOVE THE FOLLOWING ITEMS:
1
Install the cartridge stylus guard and
use a small piece of masking tape to
hold it in place.
Place periphery foam strip across the
top of the turntable plinth. This should
have a snug fit against the foam block
supporting the tonearm.
Secure tonearm with supplied foam
stabilizer block. Then wrap unit with
supplied plastic bag.
Place small foam block underneath the
tonearm platform for support.