Product Manual

1
2
3b
CX FLEX™
Single-Power+
USB-C
Female End
USB-C
Male End
Optional Power Supply
(400-00118)
3a
CX FLEX™ PRODUCT MANUAL
2
MTI P/N 063-00294 rev 2 ©2019 MTI All Rights Reservedwww.mtigs.com | T:800.426.6844
INSTALLATION
MATERIALS IN BOX
Feed power cable through hole in xture (if needed),
and press down on the base plate for 10 seconds for full
VHB contact. Allow 24 hours for full VHB adhesion.
Alternately, use the Power Supply provided with
the product you are intending to secure, with the
appropriate adapter.
Clean the desired surface with an alcohol pad allow it to
completely dry. Peel the red lm from the VHB adhesive.
Use the individual power supply and plug it into
the nearest outlet. Use an outlet installed near the
equipment that is easily accessible.
Use only certified AC main power supply adapters compliant
with Limited Power Source (LPS); use of other power supply
may cause malfunctions and electrical hazard.