Product Manual

USB-C Sensor: Insert the other end of the cable into

the device.

Plug the USB-C end of the sensor into the CX Flex until it

clicks.

Flexi-Disc Sensor: Peel the red lm from the VHB

adhesive and press rmly onto the product for 1

minute if the product surface is curved, or 30 seconds

if it is at.

System will auto-arm after 1 minute, or arm

immediately by holding a whitelisted User Card over

the RFID Icon.

click

CX FLEX™ PRODUCT MANUAL

MERCHANDISING

KEY WHITELIST

Place Authorization Card over the

RFID icon to register to system.

LED will be solid blue.

System must be disarmed

to perform this operation.

Place the User Key over the RFID

icon you want to add.

If successful  unit beeps 2 times

If unsuccessful  unit beeps 4

times (retry)

Repeat process for all User Keys

until they are successfully added.

To close the whitelist mode, place

the Authorization Card over the

RFID icon. Whitelist mode will end

automatically after 3 minutes of no

use. LED will be ashing white.