Product Manual

CX FLEX™ PRODUCT MANUAL

LED STATUS INDICATORS

Visual Reference System Status Condition Solution

LED is ashing blue.

1. Connect Provisioning Mode

2. Overcurrent when disarmed

1. In Connect Provisioning Mode; LEDs return to previous

Color when Provisioning is complete or times-out after

~1.5 minutes.

2. System has gone into overcurrent protection and user has

disarmed the system. Unplug any product which may be

drawing too much power. The system will self-heal.

LED is ashing yellow.

Ready to be Armed, provisioned

for Connect, but not communi-

cating to Connect Mesh Network

Ensure Connect Mesh is operating properly.

LED is solid yellow.

1. Armed, provisioned for Con-

nect, but not communicating

to Connect Mesh Network

2. Delete Whitelist Mode (If using

Authorization Card)

1. Ensure Connect Mesh is operating properly.

2. System is deleting whitelist. Wait until complete.

WARNINGS

1. For indoor use only, shall not be exposed to dripping or splashing.

2. Do not expose to excessive heat sources, sunshine, ﬁre or the like.

3. The socket-outlet shall be installed near the equipment and shall be easily accessible.

4. No user replaceable parts inside, refer servicing to manufacturer speciﬁed agency or qualiﬁed service

personnel.

5. Only use accessories/battery speciﬁed by the manufacturer.

Disposal:

All electrical and electronic products including batteries should be disposed of separately

from the municipal waste stream via designated collection facilities appointed by the

government or the local authorities.