User Manual

FREEDOM MICRO
®
II
HS
MANUAL
11
MTI P/N 063-00341 rev A ©2021 MTI All Rights Reserved
www.MTIGS.com | T:800.426.6844
RFID COMMANDS
Default Mode
Enter Standard Mode
Program User Card
Exit Programming Mode
Arm/Disarm Position
Set Lockdown/Unlock While Armed
AUTHORIZATION
AUTHORIZATION
VERSA KEY
™
VERSA KEY
™
VERSA KEY
™
Double Beep
Double Beep
Double Beep
Double Beep: Accepted
Four Fast Beeps: Rejected
Double Beep:
Accepted
Four Fast Beeps:
Rejected
Tap and Hold Access Card for 10
seconds. It will double beep immediately,
and double beep again after 10 seconds.
Position will automatically lock down
when armed, and unlock when disarmed
when in Lockdown mode.
Flash White every 8 seconds:
Disarmed
Solid White:
Armed
Solid White:
Armed - Locked
Auto time out if no user cards are
added, reverts to Default mode.
Flash White every 8 seconds:
Disarmed
Flash White Every 8
Seconds:
Disarmed - Automatically
unlocks