User Manual

FREEDOM MICRO
®
II
HS
MANUAL
14
MTI P/N 063-00341 rev A ©2021 MTI All Rights Reserved
www.MTIGS.com | T:800.426.6844
Visual Reference
System Status
Condition
Flashing Yellow Every 5 Seconds
Puck is armed, lifted, puck is NOT connected
to a mesh network. Only applicable in
Network Mode.
Solid Blue
After tapping an authorization card: The
puck is in enrollment mode. Tap VersaKey™
to authorize them for use in standard mode.
Enrollment mode closes automatically in 3
minutes.
In normal use: Overcurrent in charging circuit
– most likely a problem in the SmartCable™.
Flashing Blue
Puck has entered network pairing mode.
Stops upon successful pairing, or after 90
seconds.
Single Red Flash
TO BE VERIFIED:
Only follows an attempt to
arm the puck. Occurs when the puck cannot
arm, for example, due to a released trigger
but the user attempts to arm the puck with
the app or key.
Multi-colored flash
Puck has received an “identify” command
from a user of the MTI Connect
®
software.
Flashing Green
Puck is disarmed in factory default mode.
Complete the setup for Standard or Network
mode to use VersaKey™ or MTI Connect
®
.
Note: The puck may automatically arm while
in this default mode, as long as all triggers
are closed for 15 minutes. Once it arms, the
LED will turn solid white.
LED STATUS INDICATORS