Users Manual Part 3

Vehicle Monitoring and Locating System Mobile Video Computing Solutions LLC
Tow Truck Installation Procedures
37 September 21, 2021
4) Insert the 1/2" self-tapping screws through the bracket slots and into the drilled
holes.
5) Tighten the screws to secure the mounting bracket.
Monitor
1) Place the monitor within the mounting bracket and capture the position with the
knob screws and washers. Hand tighten.
2) Adjust viewing tilt to desired position by loosening as needed.
3) Tighten knobs with pliers.
4) Connect the trigger cable to the monitor.
This section intentionally blank