User's Manual

fieldsheer.com
11 12
® ®
QUICK START GUIDE - SOCKS QUICK START GUIDE - INSOLES
6-3. To power off your garment, press
and hold the control button until the
LED lights turn off. If you plan to not
use your garment for more than a few
days, we recommend you unplug
your batteries and charge them.
2S
6-1. Press and release the battery button to adjust
heat levels to reach your desired setting.
MW37V022(Battery)
NON-Wireless remote control for Heated socks
3+Hrs.
100%
5+Hrs.
65%
10+Hrs.
25%
H M L
6-2. To power off your garment, press
and hold the control button until the
LED lights turn off. If you plan to not
use your garment for more than a few
days, we recommend you unplug
your batteries and charge them.
2S
1. To charge your heated insoles, plug the included dual Micro
USB cable into the micro USB port on the back of each
insole. Plug the USB-A into the included wall charger or
powered USB port
2. Charge for 4+6 hours. Red LED light
indicates charging state. Green LED light
indicates fully charged 100%
3. To turn heated insoles on or off press and Hold button on
back of insoles for 2 seconds.
5. The LED light on back of insole indicates
the current heating level. Red(High),
Yellow(Medium) and Green(Low).
Charging 100%
4. Use remote control to
set desired heat level. or
press the power button on
the back of each insole.
2 Hrs.
100%
3 Hrs.
75%
5 Hrs.
50%
H M L
MWRA37V (Remote Control)
Remote Control for Heated Insoles
HEATED INSOLES