8 inch Full Ruggedized Tablet xTablet T8540 Quick Start Guide 1
Thank you for your choosing the new Tablet PC. This guide serves to enable users to get to know and familiar with our product as soon as possible. Here we have made a brief introduction to the key layout and definitions in figures and words. Attention： This user guide is based on Windows 10 home edition This user guide is an introduction for full function tablet. Your device may not have all functions. The illustrations in this manual may differ from the actual product.
Contents Ⅰ. Use of the previous note ..................................................................................... 4 Ⅱ. Key Layout and Definitions ............................................................................. 5 Ⅵ. Introduction to Desktop..................................................................................... 6 1. Windows 10 start image .............................................................................................. 6 2. Image slide applications ...........
Ⅰ. Use of the previous note 1. With the wrong type of battery replacement will be explosive danger, be sure to use the original battery. 2. The company shall not take any responsibility for the loss or removal of the information in the tablet, which is caused by the operation, maintenance or other accidents of the non-normal operation of the software and hardware. 3. Please backup your important information at any time. 4. Please do not disassemble the tablet; otherwise it will lose the right to guarantee.
Ⅱ. Key Layout and Definitions 1 Power button:to start or close touch screen panel. You can also let the computer ○ to sleep or wake up from hibernation mode 2 ○ 3 voice sound +/ voice sound-: increase/reducethe volume ○ 4 ○ TF card slot：from the opening insert TF Card 5 SIM card slot:rom the opening insert SIM Card ○ 6 Charging interface: charging the tablet via DC adapter ○ 7 Micro ○ USB 3.0 interface：data transmission by inserting the micro USB 3.
10 Front camera:camera, video ○ 11 Indication LED:boot charge indication ○ 12 Light sensor：Perception of external pipeline strength, electrical signal to CPU ○ 13 MIC：Recording sensor ○ 14 Speaker: ○ built-in speaker, so you can hear the sound without additional link equipment 15 Rear camera:camera, video ○ Ⅵ. Introduction to Desktop 1. Windows 10 start image Windows 10 start image: On the start screen, you can see many programs fixed in the image.
2. Image slide applications Slide to right Slide to the right from the left side of the screen to scan the application program in running. Slide downward 7 Slide to left Slide to the left from the right side of the screen to setting Charm menu column.
In start screen, slide from the top of the screento view application programs Slide with finger In start screen, slide finger up and downto move the image.
3． Introduction to app Interface Besides the application programs already fixed on the start screen, you can also start other application programs in all application programs, such as other software application programs attached to the Tablet PC.
one second and then let go (3) Click the Pin to start Conversely, if you want to cancel or delete a certain application in the start screen, (1) lightly touch, press and hold the application program magnet for about one second and then let it go and run, and select 4．Charm menu column Slide it to the left from the right side of the screen to start Charm menu column, including: 10
Start, Device, Setup, Share, and Search Program. Slide it to the left from the right side of the screen to start Charm menu column, Usually: File Explorer,Settings,Power, and All apps Can Sleep/Shut down/Restart the Tablet PC Can let you search the files and application programs in the Tablet PC. Can let you set up the Table PC.
Device Menu Set up Menu 5． Multitasking operating interface slide it right from the left side of the screen, Let go when Can see the running applications. We can enter the application, also can be deleted.
Ⅳ. Basic Operations 1. Sleep, restart and power off V.Windows operating instructions of special function module 1、U-blox GPS： (1).Copy u-blox test tool to desktop.
(2).Open the software, chose receiver, and chose port again, click COM1. (3).In the same way for receiver, chose Baudrate, click 9600.
(4).As below picture, double click the satellites model picture to enlarge. (5).The blue colors are the satellites that searched, green color are effective satellites. The numbers in the right are signal value. Standard: Enviroment: in open field, no metal in around, no obstacles. Sunny weather, no clouds covering. Condition:cansee satellites above 12 pieces, effective satellites above 10 pieces. Have2-3pieces satellites value reach to above 40 dB.
VI.
1. GPS Module operation （1）. Copy GPS testing software on the local （2）. Click install, and open （3）.See the GPS status shows off on the top left corner. Click off and enter into set interface （4）.
（5）. Chose mode, click device only (6). Finally return GPS main interface. Can see GPS Status shows on (7). In open field and waiting for 1min and check if there is a satellite (8).
Standard: Enviroment: in open field, no metal in around, no obstacles. Sunny weather, no clouds covering Condition: can see satellites above 12 pieces, effective satellites above 10 pieces.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
