MobileDemand xTablet C1200 USER MANUAL
Table of Contents COPYRIGHT................................................................................................ 4 REGULATORY STATEMENT................................................................................ 4 Federal Communications Commission Statement .......................................................................................................... 4 Declaration of Conformity ........................................................................................................
USING THE MEMORY CARDS .......................................................................... 26 Inserting a Memory Card ............................................................................................................................................... 26 Removing a Memory Card ............................................................................................................................................. 26 USING THE 3G ANTENNAS .................................................
Preface Copyright Copyright© 2011. All rights reserved. No part of this user manual may be transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of the manufacturer. Information is subject to change without prior notice.
Preface RF exposure warning This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR Value: 0.
Preface Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. Battery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN YOUR AREA.
Preface Safety Instructions DO NOT block the opening vents provided for ventilation. Blocking these vents may cause the xTablet Convertible processor to overheat. Always keep strong magnetic or electrical objects away from your xTablet Convertible. DO NOT use or store your xTablet Convertible in extreme temperatures. DO NOT place your xTablet Convertible near fire or other sources of heat. DO NOT expose to dust or corrosive materials. DO NOT tamper the battery. Keep it away from children.
Preface DO NOT attempt to service your xTablet Convertible yourself. Any attempt to do so will make the warranty invalid. When servicing, refer to qualified service personnel. For better environmental protection, waste batteries should be collected separately for recycling or special disposal. CAUTION FOR ADAPTER THIS XTABLET CONVERTIBLE IS FOR USE WITH DEDICATED AC ADAPTER. BATTERY SAFETY DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
Before You Start Before You Start Congratulations on your purchase of this xTablet Convertible. This business xTablet Convertible is portable and suits a wide-range of user requirements, providing users with maximum computing experience. Before you begin using your xTablet Convertible, read this chapter to familiarize yourself with the main components installed in the system. Package Contents The following items come with your package. If any of them is damaged or missing, please contact your retailer.
Before You Start Features • Intel HM55 platform • Operating system supports Microsoft® Windows 7 • 12.
Before You Start Components Front View No. Item Description 1 Camera Use to take picture, record videos, or video conference. 2 Display panel Provides visual output. 3 Fingerprint scanner Scans fingerprints for biometric identification.
Before You Start No. Item Description 4 Brightness control button Press to increase the LCD panel brightness by one level. 5 Brightness control button Press to decrease the LCD panel brightness by one level. 6 SAS button Press to exit Windows and switch to Standby mode. 7 Power button Press to turn your xTablet Convertible on or off. 8 Quick menu button Press to access the quick menu. 9 LCD direction button Press to rotate the screen orientation.
Before You Start Left View No. Item Description 1 USB port Connects USB peripheral devices. 2 Card reader Use to insert memory cards to transfer pictures, music, and data between your xTablet Convertible and flash compatible devices. The card reader supports SD (Secure Digital), SDHC, Mini-SD (with adapter), cards. 3 eSATA/USB Combo port Connects an external hard disc drive using an eSATA cable for faster data transfer, or a USB cable for USB peripheral devices.
Before You Start Back View No. Item Description 1 Kensington lock slot Connects to a Kensington-compatible xTablet Convertible security lock. 2 VGA port Connects to a display device. (e.g. external monitor, LCD projector). 3 LAN (RJ-45) port Connects to a local area network (LAN) using an Ethernet cable. 4 DC-in jack Connects the power adapter.
Before You Start Bottom View No. Item Description 1 Docking station port* Connects the xTablet Convertible to a docking station. 2 Modular I/O port bays Use for user changeable modular I/O bay to accommodate various devices applications. 3 Cooling vents Use for air convection. Do not cover the cooling vents to protect your xTablet Convertible from overheating. 4 Stylus Use for accurate control input to the LCD touch panel and digitizer. 5 Battery compartment Contains the battery.
Before You Start Status Indicators The status indicators in the upper left corner of the keyboard light up when a particular function of the xTablet Convertible is active. Each indicator is marked with a symbol. Icon Item 16 Description Power indicator The LED always lights on (blue) when the system is running. When the system is in sleep mode, the LED will blink. WLAN Indicates the status of wireless LAN communication. HDD A blinking HDD LED indicates HDD activity (data is being read or written).
Getting Started Getting Started This chapter will guide you on how to use your xTablet Convertible. Powering Up Your xTablet Convertible Your xTablet Convertible can be powered up using the AC adapter or the Lithium-ion battery. Connecting the AC Adapter The AC adapter powers up your xTablet Convertible and charges the battery. 1. Connect the AC adapter to the DC-in jack of your xTablet Convertible. 2. Connect the AC adapter to the power cord. 3. Plug the power cord to an electrical outlet.
Getting Started battery is installed, your xTablet Convertible uses power from the electrical outlet.
Getting Started Installing the Battery To install the battery, follow the steps below: 1. Slide and hold the battery latch to the unlock position. 2. Align and insert the battery to the battery compartment. 3. Push completely until the battery locks into place. 4. Release the latch to the lock position to secure the battery. Charging the Battery The Lithium-ion battery is not fully-charged upon purchase. To charge the battery, follow the steps below: 1. Install the battery to your xTablet Convertible.
Getting Started Removing the Battery To remove the battery, follow the steps below: 1. Slide and hold the battery latch to the unlock position. 2. Remove the battery out of the battery compartment. Starting Your xTablet Convertible Using the Display Panel • To open the display panel, unlock the chassis latch to open the xTablet Convertible chassis. Lift the cover lid up to upright position. • To adjust the LCD panel, twist the LCD panel according to your preference.
Getting Started • To switch to tablet mode operation, twist the LCD panel 180°, then place it back on the xTablet Convertible chassis. Lock the chassis latch to secure the LCD panel. Turning On Your xTablet Convertible Press the button until the Power LED lights up. Adjusting the LCD Panel Brightness You can adjust the brightness by pressing the Brightness control buttons. • To increase the brightness, press the • To decrease the brightness, press the button. button.
Getting Started Changing the Display Orientation You can rotate the display orientation to suit your preference. Each press of the button will rotate the display 90° clockwise. Shutting Down Your xTablet Convertible It is important to properly shut down your xTablet Convertible to avoid the loss of unsaved data. To shut down your xTablet Convertible, follow the steps below: 1. Click Start. 2. Click Shut down.
Getting Started Using the Keyboard No. Keys Description Function keys These function keys are used to perform designated tasks. The tasks for each key may vary from one application to another. [Fn] Press the [Fn] key in combination with other keys to execute a command. [Fn] + F3 Toggles the touch pad to on/off. [Fn] + F4 Switches to suspend mode. [Fn] + F5 Toggles between LCD, External display, or both. [Fn] + F8 Decreases the volume by one level.
Getting Started Using the Touch Pad The touch pad is a cursor-pointing device that provides all the features of a twobutton mouse. Its primary function is to move the cursor around the screen. You can also point, select, or drag items or objects on the screen. Main touchpad Left button Right button Point Slide your finger on the touch pad to point the cursor to an item or object on the screen.
Getting Started Using the Stylus This xTablet Convertible comes with an integrated stylus for accurate control input to the LCD touch panel and digitizer. You can use the stylus to point, select, or drag items or objects on the screen. To use the stylus, simply remove it from the back of the xTablet Convertible. Calibrate the Screen To ensure touch accuracy, calibrate the screen. 1. Click Start > Control Panel. 2. Select Hardware and Sound > Calibrate the screen for pen or touch input.
Getting Started 3. Click Calibrate. 4. Follow the on-screen instructions to complete screen calibration. Using the Quick Menu Press the button to enter the Quick menu. Click on the icon to enable the respective function including wireless network, Bluetooth, 3G, GPS, and airplane mode. View the battery charge cycles. 26 Click the icon to set up the media file for the program mode. Select the media file and click Open.
Getting Started Using the Memory Cards Your xTablet Convertible supports different types of memory cards to provide faster data transfer. Supported types are as follows: • SD card • SDHC card • Mini-SD card (with adapter) • MS card (Memory Stick/PRO) • MMC card • Mini-MMC card (with adapter) Inserting a Memory Card With the label side up, push the memory card into the memory card slot until it clicks into place. Removing a Memory Card It is important to remove the memory card properly.
Getting Started Using the 3G Antennas GobiTM 2000 3G and GPS is an optional module. In order to have better signal, the antennas suggest using angle as below: CAUTION • If the antennas turn to other angles, it may cause low signal.
Making Connections Making Connections This chapter will guide you on installing peripheral devices to maximize the use of your xTablet Convertible. Connecting External Display Devices You can connect your xTablet Convertible to other display devices, such as a projector, another display monitor, or a TV. Your xTablet Convertible is equipped with a VGA port which provides both digital and analog video signals. VGA D-sub and HDMI interfaces use digital signals; VGA interface uses analog signals.
Making Connections the package. They are sold separately.
Making Connections Connecting USB Devices You can connect your xTablet Convertible to other USB devices, such as a mouse, keyboard, digital camera, printer, or an external hard disk drive. 1. Connect one end of a USB cable to the USB port of your xTablet Convertible. 2. Connect the other end to the USB device (if necessary). NOTE • The USB cable is not included in the package. It is sold separately or it may come with your USB device.
Making Connections Connecting Headphones You can connect your xTablet Convertible to a headphone or external speakers. Plug the audio jack of the headphone or speakers to the Headphone jack of your xTablet Convertible. NOTE • The headphone is not included in the package. It is sold separately. Connecting External Microphone You can connect your xTablet Convertible to an external microphone. Plug the audio jack of the microphone to the Microphone jack of your xTablet Convertible.
Making Connections Connecting to a Local Area Network (LAN) You can connect your xTablet Convertible to a local area network (LAN) using the RJ-45 LAN port. 1. Connect one end of an RJ-45 cable to the LAN port of your xTablet Convertible. 2. Connect the other end to network hub or a wall socket. NOTE • The RJ-45 cable is not included in the package. It is sold separately. Connecting an External SATA HDD You can connect your xTablet Convertible to an external SATA device using the eSATA/USB combo port.
Making Connections Connecting to Wireless Connections You can connect your xTablet Convertible to a wireless local area network, WWAN, Bluetooth, or GPS. Before using a wireless built-in device, you need to turn the respective built-in wireless functions on. Connecting to a Wireless Local Area Network Your xTablet Convertible comes with a WLAN module. A wireless network can be added either when the network is detected or by manually entering the settings information. To connect, follow the steps below: 1.
Making Connections NOTE • Wi-Fi access requires service from a wireless service provider. Contact your service provider for more information. • Actual wireless connectivity will depend on system configuration. Please contact your dealer for more information. Connecting to a Bluetooth Device Your xTablet Convertible can connect and communicate with other Bluetooth-enabled devices. To add a device, follow the steps below: 1. Press the button to open the Quick menu. 2.
Making Connections 7. The system displays the selected Bluetooth device. Double-click on the device icon to connect. 8. Enter the passkey (PIN) to start pairing, and click OK. NOTE • The PIN you enter on the xTablet Convertible must be the same PIN to be entered on the other Bluetooth device. • Once a partnership has been created, connecting to that device again will no longer require entering the PIN.
Power Management Power Management This chapter will guide you on how to manage the system power. Using the Power Plan To improve energy efficiency, you can use the power plan to reduce the amount of power your xTablet Convertible uses, maximize the performance, or balance the two. 1. Click Start > Control Panel. 2. Select System and Security > Power Options. 3. Select a power plan. 4. To adjust the selected power plan settings, click Change plan settings.
Power Management Using the Power Saving Mode When you are not using the xTablet Convertible, turn off the xTablet Convertible or set the xTablet Convertible to enter sleep mode. To set the xTablet Convertible to enter sleep mode, follow the steps below: 1. Click Start. 2. Click Shut down > Sleep. To wake up the xTablet Convertible from sleep mode, do one of the following: • Press the button. • Press any key on the keyboard.
Using the BIOS Setup Utility Using the BIOS Setup Utility Your xTablet Convertible has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the xTablet Convertible. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your xTablet Convertible basic settings.
Power Management Users are allowed to enter new values to replace the default settings in certain fields, and the rest of the fields are specified by system default parameters and 37
Using the BIOS Setup Utility cannot be modified by users. Reverse the attribute of the main options and press Enter to enter into the submenu. Press Esc to return to the previous configuration page. Main Menu Display the system overview information about BIOS version, CPU features, and total memory size. You can also set the system date and time. Advanced Menu View and configure SATA mode, FAN calibration, battery calibration, wake up event, and RF device control settings.
Using the BIOS Setup Utility Boot Menu Configure the boot type and boot sequence. Security Menu Set or change the Administrator and User passwords, and configure TPM settings.
Using the BIOS Setup Utility Save & Exit Menu Save or discard the changes, or restore the default values for all setup options before leaving the BIOS Setup Menu.
MobileDemand xTablet C1200 DataGuard Software MobileDemand xTablet C1200 DataGuard Software Your xTablet Convertible supports MobileDemand xTablet C1200 DataGuard software that enables users to backup file(s) from the hard disk drive to the Disk on Module (DOM). With this software, users can do both automatic backup and mirror backup. Automatic backup: Synchronize the files users create or update and backup the files changed in HDD to DOM automatically.
MobileDemand xTablet C1200 DataGuard Software 2. Click OK and enter the main menu. There are mainly three parts: Tool bar, HDD task list and DOM task list. Tool bar: a b c d e f a. New button: create a new task. b. Mirror button: do mirror backup. c. Delete button (on the left): delete tasks in HDD task list. d. Delete button (on the right): clean up backup in DOM. e. Tools button: access the software user’s manual and configure its setting. f. History button: view the latest mirror backup log.
HDD task list: MobileDemand xTablet C1200 DataGuard Software It consists of the task list in HDD. The file number and file size of all tasks are displayed on the bottom left of the screen. Task list fields include: task, notes, local path, size, file number, and owner. Task: a unique task name. Notes: users can input notes for a task to describe the task. Local Path: the local path that the user chooses when creating tasks. Size: the total file size of a task.
MobileDemand xTablet C1200 DataGuard Software DOM task list: It consists of the task list in DOM. The free space in DOM is displayed on the bottom right of the screen. Task information includes: task name, local path, size, file number last backup date, owner, and backup process status. Task: the task name created by the user. Local Path: the local path that the user chooses when creating tasks. Size: the total file size of a task. File Number: the total file number of a task.
Creating New Tasks 1. MobileDemand xTablet C1200 DataGuard Software Create a new task by clicking the New button. NOTE • The maximum character input for Task Name and Notes is 64. 2. Enter the task name and choose the folder that you want to backup, then click OK. It will back up the file(s) in the folder immediately. NOTE • MobileDemand xTablet C1200 DataGuard will monitor the task(s) you have checked and if there are any changes on the file(s), it will do automatic backup. 3.
MobileDemand xTablet C1200 DataGuard Software Running the Mirror Backup Click the Mirror button to run the mirror backup. When mirror backup is complete, the backup log appears on the screen. Deleting Tasks Users can delete the task(s) in HDD. Check the box on the HDD task list and click the Delete button to delete the task(s).
MobileDemand xTablet C1200 DataGuard Software Check the box on the DOM task list and click the Delete button to clean up the folder(s) exists in DOM which not mapping with the task(s) in HDD task list. If the task is listed in the HDD task list, users are not allowed to delete the relevant task(s) in DOM.
MobileDemand xTablet C1200 DataGuard Software Using Tools Click the Tools button on the tool bar and do the following: • Select Help to get the software user’s manual. • Select Setting to set whether you want to run MobileDemand xTablet C1200 DataGuard when Windows starts up. • Select About to view the current software version.
Troubleshooting Troubleshooting This chapter contains a list of common problems that you might experience when using your xTablet Convertible, and techniques to try and overcome the problem. If you need additional help, contact your retailer. Problems The battery isn’t charging. The screen suddenly turns blank. The xTablet Convertible cannot connect to Internet. Nothing happens when I press the Power button. The xTablet Convertible cannot resume from hibernate or standard mode.
Specifications Specifications Features Specifications Type & Speed Intel I3 and I5 UVL serial Processor Major Chipsets System Memory Install Method BGA Power Consumption 18W Chipsets Intel HM55 Type DDR-III 800/1333 Capacity Two 204-pin DDRIII SODIMM sockets each for 2GB, 4GB (if available) Maximum Memory 8GB LCD 12.1” WXGA (1280x800) TFT, LED backlight Camera 1.
Specifications Features Graphic Specifications Graphic Controller Graphic Memory Point Device I/O Devices Communications Expansion Card Memory Card Networking devices Wireless networking devices Bluetooth I/O Ports Standard Integrated graphic controller TBA Hidden Capacitive Touch Pad – PS/2 mouse interface / 2 buttons support Right/Left One Express 34 card slot One SD Card reader slot supports SDHC Integrated Gigabit bps Ethernet Support PXE function One Mini Express card slot One is for WL
Specifications Features Environment Specifications Temperature / Humidity Operating Environment Temperature: -20°C ~ 50°C (Operating under 0°C by using SSD as the main storage) Non-operating Environment Temperature: -40°C ~ 70°C Operating Humidity：20% ~ 90%, relative humidity, non-condensing (Depends on temperature) Dimensions 328mm (W) x 277mm (D) x 40.8mm (H) Weight 2.5kg (with standard Battery) Specifications are subject to change without prior notice.
MobileDemand 1501 Boyson Square Drive Suite 101 Hiawatha, Iowa 52233 Phone - 1.877.784.
