xTablet T1200 Rugged Tablet PC User's Guide
MobileDemand, LC 1501 Boyson Square Drive Suite 101 Hiawatha, IA 52233 U.S.A. Phone: 877.784.4338 Fax: 319-363-4122 Web: www.RuggedTabletPC.com No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written perm is sion of the publisher.
Table of Contents COPYRIGHT ................................................................................................. 5 REGULATORY STATEMENT ................................................................................. 5 Federal Communications Commission Statement .......................................................................................................... 5 Declaration of Conformity ....................................................................................................
Inserting a PC Card........................................................................................................................................................ 24 MAKING CONNECTIONS ........................................................ 25 CONNECTING USB DEVICES ........................................................................... 25 CONNECTING PERIPHERAL DEVICES................................................................... 26 CONNECTING TO A LOCAL AREA NETWORK (LAN)...............
Preface Copyright Copyright© 2013. All rights reserved. No part of this user manual may be transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of the manufacturer. Information is subject to change without prior notice.
Preface RF exposure warning This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR Value: 0.317W/kg This device is operation in 5.15 – 5.
Preface Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption Rate – Taux d'absorption spécifique) d'IC lorsqu'il est installé dans des produits hôtes particuliers qui fonctionnent dans des conditions d'exposition à des appareils portables. Battery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN YOUR AREA.
Preface CAUTION FOR ADAPTER THIS TABLET PC IS FOR USE WITH DEDICATED AC ADAPTER. BATTERY SAFETY DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. CAUTION FOR RJ-45 The RJ-45 jack is not used for telephone line connection.
Before You Start Before You Start Congratulations on your purchase of this tablet PC. This rugged tablet PC is portable and provides users with maximum mobile computing experience in a wide range of working environments. Before you begin using your tablet PC, read this chapter to familiarize yourself with the main components installed in the system. Package Contents If any of following items is damaged, please contact your retailer.
Before You Start Features • Intel ”Ivy Bridge” 3rd Generation i-Core Series CPU • Rugged feature: 5 feet drop and dust/waterproof IP 65 • 10.
Before You Start Components Front View No. Item Description 1 Status Indicators (Power, Battery, HDD, Wireless) Indicate the corresponding function status. See “Status Indicators” on page 15. 2 Camera Use to take pictures. 3 Speaker Emit sound. 4 Power button Press to power on and off the tablet PC. 5 Scanner button Press to trigger the Barcode scan function if the barcode scanner is on. It can also be assigned to launch a specific Windows-based program via Quick Menu.
Before You Start No. Item Description 11 Camera button Shutter button for camera utility 12 Function button Use with other key combinations to perform special functions. • < > + < >: Increase audio volume. > + < >: Decrease audio volume. • < > + < >: Increase screen brightness. • < • < > + < >: Decrease screen brightness. • < > + <1>: Emulate F1 key. • < > + <2>: Emulate F2 key. • < > + <3>: Emulate F3 key. • < > + <4>: Toggle keypad backlight . • < > + <5>: Emulate F5 key.
Before You Start Back View No. Item Description 1 Camera LED flash Provide additional lighting when taking pictures under low light environment. 2 Camera Use to take pictures. 3 Battery latch Lock the battery in place. 4 Battery compartment Contain the battery. 5 Battery LED indicator Press the button to display the remaining battery power level. 6 Battery latch release button Press and hold the button to slide the battery latch to the unlock position. Bottom View No.
Before You Start Left View No. Item Description 1 Kensington lock slot Connect to a Kensington-compatible tablet PC security lock. 2 Mini USB port Connect USB peripheral devices. 3 Serial port (RS-232) Connect a peripheral device, such as a printer or other device with serial port. 4 LAN (RJ-45) port Connect to a local area network (LAN) using an Ethernet cable. 5 DC-in jack Connect the power adapter. Right View No.
Before You Start Status Indicators The status indicators in the upper left corner of the tablet PC light up when a particular function of the tablet PC is active. Each indicator is marked with a symbol. Icon Item Description Power The LED always lights on (blue) when the system is running. When the system is in sleep mode, the LED blinks.
Getting Started Getting Started This chapter will guide you on how to use your tablet PC. Powering Up Your Tablet PC Your tablet PC can be powered up using the AC adapter or the Lithium-ion battery. Connecting the AC Adapter The AC adapter powers up your tablet PC and charges the battery. 1. Connect the AC adapter to the DC-in jack of your tablet PC. 2. Connect the AC adapter to the power cord. 3. Plug the power cord to an electrical outlet. Using Battery Power 1.
Getting Started Installing the Batteries To install the batteries, follow the steps below: 1. Align and insert the first battery to the battery compartment. 2. Push completely until the battery locks into place. 3. Slide the battery latch to the lock position to secure the battery. 4. Repeat Step 1 to 3 to insert the second battery. Charging the Battery The Lithium-ion battery is not fully-charged upon purchase. To charge the battery, follow the steps below: 1. Install the battery to your tablet PC.
Getting Started Charging Time Number of battery pack Charging duration (at 25ºC) 1 2 3 hours 6 hours • NOTE The charging time may be longer if you are using your tablet PC while charging the battery. CAUTION • DO NOT charge the battery if the temperature is below 0ºC or higher than 60ºC. • Use only the supplied AC adapter. Using other AC adapters may damage the battery or your tablet PC.
Getting Started Removing the Batteries To remove the batteries, follow the steps below: 1. Press and hold the battery latch release button to slide the second battery latch to the unlock position. 2. Remove the second battery out of the battery compartment. 3. Repeat Step 1 and 2 to remove another battery.
Getting Started Starting Your Tablet PC Turning On Your Tablet PC Press the button until the Power LED lights up. Changing the Display Orientation You can rotate the display orientation to suit your preference. Shutting Down Your Tablet PC It is important to properly shut down your tablet PC to avoid the loss of unsaved data. To shut down your tablet PC, do the following: Tap Start > Shut down. Wait for your tablet PC to turn off power completely before removing the power source (if necessary).
Getting Started Using the Stylus This tablet PC comes with an integrated stylus for accurate control input to the LCD touch panel and digitizer. You can use the stylus to point, select, or drag items or objects on the screen. Calibrate the Screen To ensure touch accuracy, calibrate the screen. 1. Tap Start > Control Panel. 2. Select Hardware and Sound > Tablet PC Settings. 3. Tap Calibrate. 4. Follow the on-screen instructions to complete screen calibration.
Getting Started Using the Memory Cards Your tablet PC supports different types of memory cards to provide faster data transfer. Supported types are as follows: • SD card • SDHC card • Mini-SD card (with adapter) Inserting a Memory Card With the label side down, push the memory card into the memory card slot until it clicks into place. Removing a Memory Card It is important to remove the memory card properly.
Getting Started Using the Smart Card Your tablet PC is equipped with a built-in smart card reader that allows you to make secure purchases, store security information, and provide identification and information using a smart card. Inserting a Smart Card Insert a smart card into the smart card slot. Using the SIM Card You can use a SIM card for wireless internet access. • NOTE Check the availability of service and plan rates of data connection with your network service provider.
Getting Started Using the PC Cards Your tablet PC supports Type II PC Card, which can perform a variety of functions. • NOTE Refer to the PC Card manual for specific instructions on the card installation. Inserting a PC Card Insert a PC card firmly into the PC card slot until it clicks into the connector.
Making Connections Making Connections This chapter will guide you on installing peripheral devices to maximize the use of your tablet PC. Connecting USB Devices You can connect your tablet PC to other USB devices, such as a mouse, keyboard, digital camera, printer, or an external hard disk drive. 1. Connect one end of a USB cable to the USB port of your tablet PC. 2. Connect the other end to the USB device (if necessary).
Making Connections Connecting Peripheral Devices You can connect your tablet PC to other peripheral devices, such as a printer or other device with serial port. 1. Connect one end of an RS-232 cable to the RS-232 port of your tablet PC. 2. Tighten the two screws on the side of the cable plug. 3. Connect the other end to the RS-232 port of a printer or other peripheral device.
Making Connections Connecting to a Local Area Network (LAN) You can connect your notebook to a local area network (LAN) using the RJ-45 LAN port. 1. Connect one end of an RJ-45 cable to the LAN port of your tablet PC. 2. Connect the other end to a network hub or a wall socket.
Making Connections Connecting Headphones You can connect your tablet PC to a headphone or external speakers. Plug the audio jack of the headphone or speakers to the Headphone jack of your tablet PC.
Power Management Power Management This chapter will guide you on how to manage the system power. Using the Power Plan To improve energy efficiency, you can use the power plan to reduce the amount of power your tablet PC uses, maximize the performance, or balance the two. 1. Tap Start > Control Panel. 2. Select System and Security > Power Options. 3. Select a power plan. 4. To adjust the selected power plan settings, tap Change plan settings.
Power Management Using the Power Saving Mode When you are not using the tablet PC, turn off the tablet PC or set the tablet PC to enter sleep mode. To set the tablet PC to enter sleep mode, follow the steps below: 1. Tap Start. 2. Select Shut down > Sleep. To wake up the tablet PC from sleep mode, do one of the following: • • 30 Press the button. Press any key on the external keyboard.
Using the BIOS Setup Utility Using the BIOS Setup Utility Your tablet PC has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the tablet PC. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS Setup Utility allows you to configure your tablet PC basic settings. When you turn your tablet PC on, the system reads this information to initialize the hardware so that it can operate correctly.
Using the BIOS Setup Utility Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Tablet Keypad / External Keyboard / < Description Selects screen. Moves up/down to select items. Enter Confirms the selection and enters the selected menu screen. / +/- Changes an option for the selected items. - F1 F2 F3 F4 > + <9> Esc Displays the Help screen. Invokes the previous values. Loads optimized default values.
Using the BIOS Setup Utility Main Menu The Main menu displays the system overview information about BIOS version, CPU features, and total memory size. You can also set the system date and time. Advanced Menu The Advanced menu allows you to select SATA mode, set the keypad backlight timer, BIOS hotkey press, calibrate fan and battery, and configure devices, power management, Intel Rapid Start Technology, and Trusted Computing settings.
Using the BIOS Setup Utility Boot Menu The Boot menu allows you to configure the boot type and boot sequence. Security Menu The Security menu allows you to set or change the Administrator and User passwords, and configure Secure Boot settings.
Using the BIOS Setup Utility Save & Exit Menu The Save & Exit menu allows you to save or discard the changes, or restore the default values for all setup options before leaving the BIOS Setup Menu.
Specifications Specifications Features Processor Specifications Type QM77 Chipset System Memory Display Two 204-pin SODIMM sockets each for DDRIII1600 2GB, 4GB, 8GB Type Maximum Memory 16GB Display Light Sensor Standard 10.4” XGA (1024x768) LCD with resistive multitouch panel Sunlight readable: 10.4” XGA (1024x768) High brightness LCD with sunlight readable resistive multi-touch panel Built-in ambient light sensor Digitizer Optional 10.
Specifications Features Specifications Audio out (For headphone)x1 Optional RF connectors for external WWAN, WLAN, or GPS antennas AC/DC Adapter Battery Life Power AC power input:100V-240V,50Hz-60Hz, 65W ;output:19V Compliant with Energy Star 5.2 One 6 cells battery pack (5200mAh, 57.72 W) is 4~5 hr.
