User's Manual

7
Step 3. Turning on your Base Station
Turn on your Base Station using the on/off switch located on the back.


You can use the volume control buttons on the front of the unit under the display
screen if the voice is too loud or too soft.
Make sure your Base Station is connected to the cellular network by checking for
the signal strength bars on the Display scr
een.
The display screen will turn on.
The emergency and reset buttons will illuminate.
If the Base is set up correctly, the Base Station will say “system ready.”
Figure 6
EMERGENCY
RESET
TEST
Volume:70°F
Figure 5
ON/OFF
Switch
OFF ON USB
Model Number: WBS GEN1.0
Serial Number: WB1XPD224Z
FCC ID:PXTWBS-01
IC ID:10876A-WBS01
IMEI Number:355306040196802
MobileHelp
Made in Malaysia





MobileHelp Customer Support 1-877-827-6207
Technical Support Use Only